YachtsOfStuff.com Connects Boaters
logon to YachtsOfStuff.com  Log In  |  register on YachtsOfStuff.com New Visitor
Search YachtsOfStuff.com Quick Search
YachtsOfStuff.com Connects Boaters
  June 18, 2018
Home | Categories
Also checkout these Close Out Specials
YachtsOfStuff.com - Sales and Specials for June
$ave on the Best Boating Gear
 Sort By:   Part Name A-Z  |  Part Name Z-A  |  Price, Lowest - Highest  |  Price, Highest - Lowest  | Page    Next Page
Image
Click to enlarger image.
Item/Description Price Order
On-Line
BoatBuckle G2 Retractable Transom Tie-Down - 14-43” - Pair - Stainless Steel SKU# 35895 BoatBuckle G2 Retractable Transom Tie-Down - 14-43” - Pair - Stainless Steel SKU# 35895
SALE ENDS: 7/15/2018
Quantity: 2. Dimensions: 14-43”. Break Strength: 1,500 lbs./ea. Safe Work Load: 500 lbs. Sleek, contoured styling. Permanently mounts to trailer. Stronger - 1,500 lb break strength. Simple, one-hand operation. Adapts to virtually any mounting angle. Stainless steel power spring. MFG #: F14256
Regular Price: $120.38
$105.33
C.E. Smith 2 Short Bunk Guide-On (pair) SKU# 39420 C.E. Smith 2 Short Bunk Guide-On (pair) SKU# 39420
SALE ENDS: 6/30/2018
Carpeted bunkboards provide proper center loading even in wind or side current conditions. 2'' x 4'' X 24” boards tilt to hug the hull and are covered with high grade marine carpet. Height of 21'' with adjustment out to 13” from frame on each side. Can be mounted on top of frame for extra height. Complete with mounting hardware to fit frames up to 3'' wide x 4-1/4'' high. MFG #: 27660
Regular Price: $94.39
$88.49
C.E. Smith 4 Roller Bunks, pair. SKU# 49856 C.E. Smith 4 Roller Bunks, pair. SKU# 49856
SALE ENDS: 6/30/2018
Roller bunks make loading and unloading small craft at very short or even dry rams easy. Pre-assembled and pre-drilled for easy installation. Maybe be installed using mounting brackets if lift and/or angle is needed, or may be bolted directly to trailer frame for a flat bottom boat, or on top of existing bunk boards. Durable 2” polypropylene rollers on 1/2” shafts mounted in a heavy gauge pre-galvanized channel. Supports up to 1500lbs of well distributed weight.
Regular Price: $137.01
$131.34
C.E. Smith 40” L.E.D. Post Boat Guide-On SKU# 35421 C.E. Smith 40” L.E.D. Post Boat Guide-On SKU# 35421
SALE ENDS: 6/30/2018
Long lasting, waterproof and shockproof, one piece red and amber LED lamps. The LED lamps make it easy to see your trailer's position when backing down the ramp and dramatically increase your trailer's visibility over the road at night. Amber light faces front, red faces rear. For trailer frames up to 3”W x 4 1/4”H. Sold in pairs. 40” Total Height. Adjusts Out to 13” each Side. Fits Frames up to 3”W x 4-1/4”H. 1-1/2” sq. 16 ga Pre-Galvanized Steel post. Extends 18” Into 2” PVC tube. MFG#: 27740
Regular Price: $97.07
$90.74
C.E. Smith 40” PVC Post Guide-On SKU# 39410 C.E. Smith 40” PVC Post Guide-On SKU# 39410
SALE ENDS: 6/30/2018
Adjusts Out to 13” each Side. Fits Frames up to 3”W x 4-1/4”H. 1-1/2” sq. 16 ga Pre-Galvanized Steel post Extends 18” Into 2” PVC tube for strength. MFG #: 27620
Regular Price: $71.78
$67.29
C.E. Smith 5 Bunk Board Guide-On SKU# 53832 C.E. Smith 5 Bunk Board Guide-On SKU# 53832
SALE ENDS: 6/30/2018
Carpeted bunkboards provide proper center loading even in wind or side current conditions. 1-1/2” square pre-galvanized uprights, angled out at 75. 2” x 4” x 60” boards tilt to hug the hull and are covered with high grade marine carpet. Boards are untreated Southern yellow pine. Height of 21” with adjustment out to 13” from frame on each side. Can be mounted on top of frame for extra height. Complete with mounting hardware to fit frames up to 3” wide x 4-1/4” high
Regular Price: $154.51
$140.42
C.E. Smith 5 Roller Bunks SKU#49857 C.E. Smith 5 Roller Bunks SKU#49857
SALE ENDS: 6/30/2018
Roller bunks make loading and unloading small craft at very short or even dry ramps easy. Pre-assembled and pre-drilled for easy installation. May be installed using mounting brackets if lift and/or angle is needed, or may be bolted directly to trailer frame for a flat bottom boat, or even mounted on top of existing bunk boards. Durable 2” polypropylene rollers on 1/2” shafts mounted in a heavy gauge pre-galvanized channel. Supports up to 1500lbs of well distributed weight. Sold in pairs.
Regular Price: $153.37
$143.14
C.E. Smith 60” L.E.D. Post Boat Guide-On SKU# 44742 C.E. Smith 60” L.E.D. Post Boat Guide-On SKU# 44742
SALE ENDS: 6/30/2018
Long lasting, waterproof and shockproof, one piece red and amber LED lamps. LED lamps make it easy to see your trailer's position when backing down the ramp and dramatically increase your trailer's visibility on the road at night. Amber light faces front, red faces rear. Mounting hardware and wiring included. Sold in pairs. 60” Total Height. Adjusts Out to 19” each Side. Fits Frames up to 3”W x 4-”H. 1-” sq. 16 ga Pre-Galvanized Steel post. MFG #: 27760
Regular Price: $117.47
$110.14
C.E. Smith 60” Post Guide-On w/I-Beam Mounting Kit SKU# 53830 C.E. Smith 60” Post Guide-On w/I-Beam Mounting Kit SKU# 53830
SALE ENDS: 6/30/2018
Post Guide-Ons allow you to see the location of your trailer under water. Designed for I-beam trailers and I-beam boat lifts, these guide-ons feature two-piece mounting clamp that works above or below the I-beam. Brackets will fit onto any height and virtually any width I-beam trailer frame. Mounting hardware included. Sold in pairs. Adjusts out to 19” each side. 1-1/2” square. 16 gauge pre-galvanized steel uprights. 2-3/8” diameter white PVC post. MFG #: 27648
Regular Price: $99.82
$93.58
C.E. Smith 75” Guide f/I-Beam Mounting SKU# 49864 C.E. Smith 75” Guide f/I-Beam Mounting SKU# 49864
SALE ENDS: 6/30/2018
Extra tall Post Guide-Ons allow you to see the location of your trailer under water. Designed for I-beam trailers and I-beam boat lifts, two-piece mounting clamp that works above or below the I-beam. Fits I-beams up to 4” wide with provided hardware. Mounting hardware included. Sold in pairs. Adjusts out to 19” on each side. Fits frames up to 3”W x 5-1/4” H. 1-1/2” square, 16 gauge pre-galvanized steel uprights, 36” high. 2-3/8” diam. white PVC posts. MFG #: 27635
Regular Price: $134.72
$125.74
C.E. Smith 75” Post Guide-On w/Unlighted Posts f/U-Bolt Mounting SKU# 53831 C.E. Smith 75” Post Guide-On w/Unlighted Posts f/U-Bolt Mounting SKU# 53831
SALE ENDS: 6/30/2018
Post Guide-Ons allow you to see the location of your trailer when it's under water. The 2” PVC tubes make it easy to see your trailer's position when backing down the ramp. Mounting hardware included. Sold in pairs. Adjusts out to 19” each side. Fits frames up to 3” W x 5-1/4” H. 1-1/2” square, 16 gauge pre-galvanized steel uprights. 2-3/8” diameter white PVC posts. MFG #: 27636
Regular Price: $138.36
$125.74
C.E. Smith Adjustable Clamp-On Rod Holder w/Black PVC Liner SKU# 36741 C.E. Smith Adjustable Clamp-On Rod Holder w/Black PVC Liner SKU# 36741
SALE ENDS: 6/30/2018
Clamp fits any rail between ” OD to 1-1/16” OD. Made from 304 stainless steel tube lined with a UV resistant black PVC and fitted with a chrome zinc alloy adjustable clamp. Angle from the rail adjusts in 15 degree increments. 9” tall tube with 1-5/8” ID. Includes two pair of 304 stainless mounting screws and the Allen key needed to make the angle adjustment and to tighten the clamp in place. MFG #: 55105A
Regular Price: $52.80
$48.89
C.E. Smith Adjustable Mid Mount Rod Holder f/1-5/16” OD - Silver SKU# 29080 C.E. Smith Adjustable Mid Mount Rod Holder f/1-5/16” OD - Silver SKU# 29080
SALE ENDS: 6/30/2018
Clamp angle adjusts in 10 increments. Hidden angle-adjusting teeth. Finish: Silver. Mount: Adjustable Mid. 1-1/4”, 1-5/16” measured outside diameter. Set the clamp to any position in 10 increments to angle your rod exactly where you want it. Strong four-screw mounting clamp resists slipping. Includes a heavy vinyl liner to protect rods and features an integrally-cast gimbal pin for strength. MFG #: 53651A
Regular Price: $137.05
$130.12
C.E. Smith Adjustable Mid Mount Rod Holder f/7/8” OD Tube w/Sleeve - Silver SKU# 29078 C.E. Smith Adjustable Mid Mount Rod Holder f/7/8” OD Tube w/Sleeve - Silver SKU# 29078
SALE ENDS: 6/30/2018
Adjustable in 10 degree increments, so you can angle your rod exactly where you want it. And these investmentcast 316 stainless steel clamp-on rod holders feature invisible adjustment for great looks. Strong four-screw mounting clamp resists slipping. Includes a heavy vinyl liner to protect rods and features an integrally-cast gimbal pin for strength. Clamp angle adjusts in 10 increments. Hidden angle - adjusting teeth. MFG #: 53650A
Regular Price: $135.95
$121.61
C.E. Smith Flush Mount Rod Holder - 0 Degree 10-1/2” Deep SKU# 29090 C.E. Smith Flush Mount Rod Holder - 0 Degree 10-1/2” Deep SKU# 29090
SALE ENDS: 6/30/2018
80C series models feature a beautifully rounded cast bottom end with a 1/2” Pipe Threaded Drain Hole. Use them when the bottom of the rod holder must have a decorative appearance, or add a drain tube when there is dry storage space under the rod holder.Super tough cast stainless steel gimbal bar designed to hold up to the punishment of downriggers or heavy tackle. A white vinyl liner protects rods and is keyed with the gimbal. ANGLE: 0 LENGTH: 10-1/2” I.D. 1-7/8”
Regular Price: $102.76
$97.28
C.E. Smith Flush Mount Rod Holder - 0 Degree 9” Depth SKU# 33226 C.E. Smith Flush Mount Rod Holder - 0 Degree 9” Depth SKU# 33226
SALE ENDS: 6/30/2018
70C series models feature a beautifully rounded cast bottom end with a 1/2” tapered pipe threaded drain. Use them when the bottom of the rod holder must have a decorative appearance, or use when there is dry storage space under the rod holder.They feature a super tough cast stainless steel gimbal bar designed to hold up to the punishment of downriggers or heavy tackle. A white vinyl liner protects rods and is keyed with the gimbal so the liner stays in place. ANGLE: 0 LENGTH: 9” I.D.: 1-5/8”
Regular Price: $78.92
$72.53
C.E. Smith Flush Mount Rod Holder - 0 Degree SKU# 29087 C.E. Smith Flush Mount Rod Holder - 0 Degree SKU# 29087
SALE ENDS: 6/30/2018
100% 316 stainless steel, these flush mount gunnel rod holders feature an extra large, low profile cap to enhance the appearance of any boat.They feature a super tough stainless steel gimbal bar welded in place designed to hold up to the punishment of downriggers or heavy tackle. A white vinyl liner protects rods, keyed with gimbal bar.. Standard 70 Series models have a tube depth of 9”, and I.D. of 1-5/8”. ANGLE: 0 LENGTH: 9” I.D.: 1-5/8”
Regular Price: $64.17
$60.54
C.E. Smith Flush Mount Rod Holder - 15 Degree 10.5” Deep SKU# 29091 C.E. Smith Flush Mount Rod Holder - 15 Degree 10.5” Deep SKU# 29091
SALE ENDS: 6/30/2018
80C series models feature a beautifully rounded cast bottom end with a 1/2” Pipe Threaded Drain Hole. Use them when the bottom of the rod holder must have a decorative appearance, or use when there is dry storage space under the rod holder. Super tough cast stainless steel gimbal bar designed to hold up to the punishment of downriggers or heavy tackle. A white vinyl liner protects rods and is keyed with the gimbal. ANGLE: 15 LENGTH: 10-1/2” I.D.: 1-7/8”
Regular Price: $102.76
$98.64
C.E. Smith Flush Mount Rod Holder - 15 Degree 9” Depth SKU# 33227 C.E. Smith Flush Mount Rod Holder - 15 Degree 9” Depth SKU# 33227
SALE ENDS: 6/30/2018
70C series models feature a beautifully rounded cast bottom end with a 1/2” tapered pipe threaded drain. Use them when the bottom of the rod holder must have a decorative appearance, or use when there is dry storage space under the rod holder. Super tough cast stainless steel gimbal bar designed to hold up to the punishment of downriggers or heavy tackle. A white vinyl liner protects rods and is keyed with the gimbal. ANGLE: 15 LENGTH: 9” I.D.: 1-5/8” MFG #: 53671C
Regular Price: $83.86
$76.38
C.E. Smith Flush Mount Rod Holder - 15 Degree SKU# 29088 C.E. Smith Flush Mount Rod Holder - 15 Degree SKU# 29088
SALE ENDS: 6/30/2018
100% 316 stainless steel, these flush mount gunnel rod holders feature an extra large, low profile cap to enhance the appearance of any boat. They feature a super tough stainless steel gimbal bar welded in place designed to hold up to the punishment of downriggers or heavy tackle. A white vinyl liner protects rods and is keyed with the gimbal bar. Standard 70 Series models have a tube depth of 9”, and I.D. of 1-5/8”. ANGLE: 15 LENGTH: 9” I.D.: 1-5/8”
Regular Price: $66.00
$60.54
C.E. Smith Flush Mount Rod Holder - 30 Degree 10.5” Deep SKU# 29092 C.E. Smith Flush Mount Rod Holder - 30 Degree 10.5” Deep SKU# 29092
SALE ENDS: 6/30/2018
80C series models feature a beautifully rounded cast bottom end with a 1/2” Pipe Thread Drain Hole. Use them when the bottom of the rod holder must have a decorative appearance, or use when there is dry storage space under the rod holder. Super tough cast stainless steel gimbal bar designed to hold up to the punishment of downriggers or heavy tackle. A white vinyl liner protects rods and is keyed with the gimbal. ANGLE: 30 LENGTH: 10-1/2” I.D.: 1-7/8
Regular Price: $105.61
$98.64
C.E. Smith Flush Mount Rod Holder - 30 Degree 9” Depth SKU# 33228 C.E. Smith Flush Mount Rod Holder - 30 Degree 9” Depth SKU# 33228
SALE ENDS: 6/30/2018
70C series models feature a beautifully rounded cast bottom end with a 1/2” tapered pipe threaded drain. Use them when the bottom of the rod holder must have a decorative appearance, or use when there is dry storage space under the rod holder. Super tough cast stainless steel gimbal bar designed to hold up to the punishment of downriggers or heavy tackle. White vinyl liner protects rods and is keyed with the gimbal. ANGLE: 30 LENGTH: 9” I.D.: 1-5/8” MFG #: 53672
Regular Price: $83.86
$78.92
C.E. Smith Flush Mount Rod Holder - 30 Degree SKU# 29089 C.E. Smith Flush Mount Rod Holder - 30 Degree SKU# 29089
SALE ENDS: 6/30/2018
100% 316 stainless steel, these flush mount gunnel rod holders feature an extra large, low profile cap to enhance the appearance of any boat. They feature a super tough stainless steel gimbal bar welded in place designed to hold up to the punishment of downriggers or heavy tackle. A white vinyl linder protects rods and is keyed with the gimbal bar so the liner stays in place. Tube depth of 9”, and I.D. of 1-5/8”. ANGLE: 30 LENGTH: 9” I.D.: 1-5/8” MFG #: 53672A
Regular Price: $65.95
$60.54
C.E. Smith Mid Mount 2-Way Clamp Rod Holder - Silver - 1-1/2” SKU# 29084 C.E. Smith Mid Mount 2-Way Clamp Rod Holder - Silver - 1-1/2” SKU# 29084
SALE ENDS: 6/30/2018
FITS STAINLESS TUBE SIZE* 1-1/2” actual OD tube using included sleeve 53661S2) FITS ALUMINUM PIPE SIZE** 1-1/4” schedule 40 pipe. Investment-cast 316 stainless steel. Unique clamping system will rotate for either horizontal or vertical mounting. Strong integrally-cast gimbal bar. Sized to fit stainless tube or aluminum pipe. Strong investment-cast 316 stainless steel rod holders with a sleek, swept-back look offer maximum corrosion resistance for long life.
Regular Price: $124.28
$112.15
C.E. Smith Mid Mount 2-Way Clamp Rod Holder - Silver - 1-1/4” SKU# 29081 C.E. Smith Mid Mount 2-Way Clamp Rod Holder - Silver - 1-1/4” SKU# 29081
SALE ENDS: 6/30/2018
FITS STAINLESS TUBE SIZE* 1-1/4” actual OD tube using included sleeve 53660S2) FITS ALUMINUM PIPE SIZE** 1” schedule 40 pipe. Investment-cast 316 stainless steel. Unique clamping system will rotate for either horizontal or vertical mounting. Strong integrally-cast gimbal bar. Sized to fit stainless tube or aluminum pipe. Strong investment-cast 316 stainless steel rod holders with a sleek, swept-back look offer maximum corrosion resistance for long life.
Regular Price: $120.78
$108.09
C.E. Smith Mid Mount 2-Way Clamp Rod Holder - Silver - 1-7/8” SKU# 29067 C.E. Smith Mid Mount 2-Way Clamp Rod Holder - Silver - 1-7/8” SKU# 29067
SALE ENDS: 6/30/2018
FITS STAINLESS TUBE SIZE* 1” actual OD tube (or 7/8” actual OD tube using included sleeve 53600S) FITS ALUMINUM PIPE SIZE** 3/4” schedule 40 pipe. Investment-cast 316 stainless steel. Unique clamping system will rotate for either horizontal or vertical mounting. Strong integrally-cast gimbal bar. Sized to fit stainless tube or aluminum pipe. Strong investment-cast 316 stainless steel rod holders with a sleek, swept-back look offer maximum corrosion resistance
Regular Price: $114.90
$104.04
C.E. Smith Pontoon Post Guide-On SKU# 39411 C.E. Smith Pontoon Post Guide-On SKU# 39411
SALE ENDS: 6/30/2018
Loading your pontoon boat onto your trailer is much easier with post guide-ons. These guide-ons mount on top of rear cross member and fit in between the pontoons to center your boat on the trailer. Steel arms are made of 1-1/2” galvanized tubing and extend fully into sturdy 2” PVC tubes. Fit up to 3” x 4-1/4” frames. 22” high. Sold in pairs. MFG #: 27670
Regular Price: $63.27
$57.68
C.E. Smith Roller Style Boat Guide-On SKU# 39409 C.E. Smith Roller Style Boat Guide-On SKU# 39409
SALE ENDS: 6/30/2018
These smooth rolling guides assist in centering the boat onto the trailer. Ideal for retrieving your boat on shallow ramps where the trailer is not far into the water when you are alone or have a crosswind or current pushing the boat. 21”H Galvanized posts extend up to 13” out from edge of trailer frame. Mounting hardware included for frames up to 3”W x 4 1/4”H. Sold in pairs. MFG #: 27610
Regular Price: $94.39
$88.49
C.E. Smith Stainless Steel Flush Mount Rod Holder - 0 Degree SKU# 30231 C.E. Smith Stainless Steel Flush Mount Rod Holder - 0 Degree SKU# 30231
SALE ENDS: 6/30/2018
80 Series, 0, 10-1/2” Length, 1-7/8” ID. Swivel base ideal for bent butt rod fishing. Swivels to follow the fish without removing the rod from the rod holder. Great for tuna or other large fish. Cast 1-piece stainless steel swivel cup. Super smooth turning precision-machined 1/2” pivot with fine threads. MFG #: 53680SA
Regular Price: $130.90
$120.28
C.E. Smith Stainless Steel Flush Mount Rod Holder - 15 Degree SKU# 30232 C.E. Smith Stainless Steel Flush Mount Rod Holder - 15 Degree SKU# 30232
SALE ENDS: 6/30/2018
80 Series, 15, 10-1/2” Length, 1-7/8” ID. Swivel base ideal for bent butt rod fishing. Swivels to follow the fish without removing the rod from the rod holder. Great for tuna or other large fish. Cast 1-piece stainless steel swivel cup. Super smooth turning precision-machined 1/2” pivot with fine threads. MFG #: 53681SA
Regular Price: $127.36
$121.61
C.E. Smith Stainless Steel Flush Mount Rod Holder - 30 Degree SKU# 30233 C.E. Smith Stainless Steel Flush Mount Rod Holder - 30 Degree SKU# 30233
SALE ENDS: 6/30/2018
80 Series, 30, 10-1/2” Length, 1-7/8” ID. Swivel base ideal for bent butt rod fishing. Swivels to follow the fish without removing the rod from the rod holder. Great for tuna or other large fish. Cast 1-piece stainless steel swivel cup. Super smooth turning precision-machined 1/2” pivot with fine threads. MFG #: 53682SA
Regular Price: $130.90
$121.61
Page 1 of 3
Page:  1  [2]  [3
If your your order includes Shipping "TBD" - You will receive shipping estimate for your approval during order review.
Contact YOS directly to buy:  Phone: (401) 580-4956, Monday thru Friday, 8 am to 6 pm EST. Saturday 9 am to 2 pm.
 Fax: (941) 580-5840
 Email: YOS@YachtsOfStuff.com
Or, register, log on and  part match to postings.
YachtsOfStuff.com has been reliably serving boaters since 2002.
Credit Cards
 
Home  |  Browse  |  Search  |  Help  |  Advertise  |  Contact Us YachtsOfStuff.com Boating Supply
Terms & Conditions
Legal Notices
Privacy Policy
Report Problems
© 2002-2018; S2ware, LLC; All rights reserved.