Overview No additional product overview available.
Manuals & Downloads: No product manuals available.
In the Box: No product box content available.
Additional Items from Transducers | See More Items from Transducers Category.
Image
Product Description
Price
Order On-Line
Airmar 117WR-1 Crows Foot Transducer Wrench SKU# 57145 Transducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut. Wrenches are constructed of 3/16” thick mild steel. They can easily be bent or modified to accommodate challenging installation locations. For use with: B117, B150, B744V, B744VL, B765C, SS555
$39.99
Airmar 117WR-2 Transducer Hull Nut Wrench SKU# 57080 A single-handed wrench to tighten the hull nut on 2” bronze and stainless steel housings. You can use wrench 117WR-4 to brace the housing when using this wrench. For use with: B117, B150, B744V, B744VL, B765C, SS555
$43.56
Airmar 117WR-3 Double Handle Transducer Wrench SKU# 57149 Transducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut. Wrenches are constructed of 3/16” thick mild steel. They can easily be bent or modified to accommodate challenging installation locations. For use with: B117, B150, B744V, B744VL, B765C, SS555
$63.92
Airmar 117WR-4 Transducer Housing Wrench SKU# 57084 A single-handed wrench that holds the main thru-hull housing via the 'wrench flats' on the side of the housing to facilitate tightening of the hull nut. For 2” bronze and stainless steel housings (P617V, B617V, SS617V). Use wrench 117WR-2 or 117WR-3 for the hull nut. *Note that this wrench will not fit on the CA500 camera housing.
$41.02
Airmar 164WR-1 Crows Foot Transducer Wrench SKU# 57148 Transducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut. Wrenches are constructed of 3/16” thick mild steel. They can easily be bent or modified to accommodate challenging installation locations. For use with: B164, SS164, B175C, SS164
$48.84
Airmar 164WR-2 Transducer Hull Nut Wrench SKU# 57083 A single-handed wrench to tighten the hull nut on B164, SS164 and SS264 housings. You can use wrench 164WR-4 to brace the housing when using this wrench. For use with: B164, SS164, SS264
$66.41
Airmar 164WR-3 Double Handle Transducer Wrench SKU# 57152 Transducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut. Wrenches are constructed of 3/16” thick mild steel. They can easily be bent or modified to accommodate challenging installation locations. For use with: B164, SS164, B175C, SS264
$82.03
Airmar 175WR-4 Transducer Housing Wrench SKU# 57087 A single-handed wrench that holds the main thru-hull housing via the 'wrench flats' on the top of the housing to facilitate tightening of the hull nut. Use wrench 164WR-2 or 164WR-3 for the hull nut. For use with: B164, B175, SS164, SS264.
NOTE: the design of the housing for these transducers changed in June 2012. This wrench is for the newer design and has an internal width of 2-3/4”. If you need a wrench for the older designs then use the 164WR-4 instead, with an internal width of 2 7/16”
$44.92
Airmar 60WR-1 Crows Foot Transducer Wrench SKU# 57146 Transducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut. Wrenches are constructed of 3/16” thick mild steel. They can easily be bent or modified to accommodate challenging installation locations. For use with: SS60, B60
$40.63
Airmar 60WR-2 Transducer Hull Nut Wrench SKU# 57081 A single-handed wrench to tighten the hull nut on 2” bronze and stainless steel housings. You can use wrench 60WR-4 to brace the housing when using this wrench. For use with: B60, SS60