YachtsOfStuff.com Connects Boaters
logon to YachtsOfStuff.com  Log In  |  register on YachtsOfStuff.com New Visitor
Search YachtsOfStuff.com Quick Search
YachtsOfStuff.com Connects Boaters
  October 20, 2018

GA-0101192820 Xdcr, CHIRP-M, Transom Mount, 8 Pin

Click to Enlarge Picture
GA-0101192820 Xdcr, CHIRP-M, Transom Mount, 8 Pin - Garmin Depth transducer, MFG # 010-11928-20, Airmar TM150 transom mount, CHIRP Mid freq. (95-155KHz), 300 Watts RMS, w/ temp sensor, 39' cable w/ 8 pin plug.
Manufacturer: Garmin
 
GA-0101192820 Xdcr, CHIRP-M, Transom Mount, 8 Pin
List Price: $299.99
Our Price: $296.04 (US Shipping: $9.80)
Out of Stock
Overview  |   Manuals & Downloads  |   In the Box     
Overview

TM150M Transom Mount - 8-Pin

This 300W Plastic Transom Mount with CHIRP technology has a maximum depth of 1,500 ft; an operating frequency of 95 to 155 kHz; a beamwidth of 26/17 degrees; and mounts on a 3 to 20 degree transom.

Transducer kit comes with installation instructions. Follow the instructions carefully to avoid damaging your boat.

  • Max Depth - 1,500'
  • Supported Deadrise/Transom Angles - 3-20 Transom


  • Additional Items from Transducers  |  See More Items from Transducers Category.
    Image Product Description Price Order
    On-Line
    Airmar 117WR-1 Crows Foot Transducer Wrench SKU# 57145 Airmar 117WR-1 Crows Foot Transducer Wrench SKU# 57145
    Transducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut. Wrenches are constructed of 3/16” thick mild steel. They can easily be bent or modified to accommodate challenging installation locations. For use with: B117, B150, B744V, B744VL, B765C, SS555
    $39.99
    Airmar 117WR-2 Transducer Hull Nut Wrench SKU# 57080 Airmar 117WR-2 Transducer Hull Nut Wrench SKU# 57080
    A single-handed wrench to tighten the hull nut on 2” bronze and stainless steel housings. You can use wrench 117WR-4 to brace the housing when using this wrench. For use with: B117, B150, B744V, B744VL, B765C, SS555
    $43.56
    Airmar 117WR-3 Double Handle Transducer Wrench SKU# 57149 Airmar 117WR-3 Double Handle Transducer Wrench SKU# 57149
    Transducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut. Wrenches are constructed of 3/16” thick mild steel. They can easily be bent or modified to accommodate challenging installation locations. For use with: B117, B150, B744V, B744VL, B765C, SS555
    $63.92
    Airmar 117WR-4 Transducer Housing Wrench SKU# 57084 Airmar 117WR-4 Transducer Housing Wrench SKU# 57084
    A single-handed wrench that holds the main thru-hull housing via the 'wrench flats' on the side of the housing to facilitate tightening of the hull nut. For 2” bronze and stainless steel housings (P617V, B617V, SS617V). Use wrench 117WR-2 or 117WR-3 for the hull nut. *Note that this wrench will not fit on the CA500 camera housing.
    $41.02
    Airmar 164WR-1 Crows Foot Transducer Wrench SKU# 57148 Airmar 164WR-1 Crows Foot Transducer Wrench SKU# 57148
    Transducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut. Wrenches are constructed of 3/16” thick mild steel. They can easily be bent or modified to accommodate challenging installation locations. For use with: B164, SS164, B175C, SS164
    $48.84
    Airmar 164WR-2 Transducer Hull Nut Wrench SKU# 57083 Airmar 164WR-2 Transducer Hull Nut Wrench SKU# 57083
    A single-handed wrench to tighten the hull nut on B164, SS164 and SS264 housings. You can use wrench 164WR-4 to brace the housing when using this wrench. For use with: B164, SS164, SS264
    $66.41
    Airmar 164WR-3 Double Handle Transducer Wrench SKU# 57152 Airmar 164WR-3 Double Handle Transducer Wrench SKU# 57152
    Transducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut. Wrenches are constructed of 3/16” thick mild steel. They can easily be bent or modified to accommodate challenging installation locations. For use with: B164, SS164, B175C, SS264
    $82.03
    Airmar 175WR-4 Transducer Housing Wrench SKU# 57087 Airmar 175WR-4 Transducer Housing Wrench SKU# 57087
    A single-handed wrench that holds the main thru-hull housing via the 'wrench flats' on the top of the housing to facilitate tightening of the hull nut. Use wrench 164WR-2 or 164WR-3 for the hull nut. For use with: B164, B175, SS164, SS264. NOTE: the design of the housing for these transducers changed in June 2012. This wrench is for the newer design and has an internal width of 2-3/4”. If you need a wrench for the older designs then use the 164WR-4 instead, with an internal width of 2 7/16”
    $44.92
    Airmar 60WR-1 Crows Foot Transducer Wrench SKU# 57146 Airmar 60WR-1 Crows Foot Transducer Wrench SKU# 57146
    Transducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut. Wrenches are constructed of 3/16” thick mild steel. They can easily be bent or modified to accommodate challenging installation locations. For use with: SS60, B60
    $40.63
    Airmar 60WR-2 Transducer Hull Nut Wrench SKU# 57081 Airmar 60WR-2 Transducer Hull Nut Wrench SKU# 57081
    A single-handed wrench to tighten the hull nut on 2” bronze and stainless steel housings. You can use wrench 60WR-4 to brace the housing when using this wrench. For use with: B60, SS60
    $52.73
    See More Items from Transducers Category.
     
    Home  |  Browse  |  Search  |  Help  |  Advertise  |  Contact Us YachtsOfStuff.com Boating Supply
    Terms & Conditions
    Legal Notices
    Privacy Policy
    Report Problems
    © 2002-2018; S2ware, LLC; All rights reserved.