ABS Listed and Meets USCG Requirements for Megayacht and Workboat Fleets
The HQ Series ABS Charger offers a rugged battery charger and power supply all in one unit. It is designed for hard-wired applications to convert AC power to DC charging current for up to three battery banks simultaneously. The unit operates under a wide range of input voltages, yet maintains a constant output to avoid any danger of overcharging batteries.
The HQ Series meets the ABS standards required of all new military, Homeland Security, megayacht, and commercial vessel construction over 150 gross tons and/or over 90 meters.
LED indicator pilot lamp
Quick disconnect on/off switch on front cover
Separate voltmeter and ammeter
Internal failure alarm ready (customer to provide indicator)
Multi-bank (3), multi-stage (bulk, absorption and float) battery charger
Ability to work as power supply
Voltage and current limiting ability
Thermal, over-current, ignition and reverse-polarity protected
Input and output fusing
Constructed with heavy-duty, corrosion resistant, UL recognized materials
Designed to run cool, quite and EMI/RFI interference free
Temperature compensation - built for optimal performance in a variety of ambient temperatures
BDF70031 Fire Fly Oasis 12V 116 Amp Hr Carbon Foam - Group 31 Battery Flrefly Oasis 12V G31 Battery
Firefly’s award-winning, patented technology is an innovative material science that removes almost all limitations of current lead-acid battery products. Firefly discovered that much of the lead in the grid structure of conventional batteries can be replaced with a totally new type of grid material, carbon foam.
Blue Sea 3000 HD-Series Battery Switch Single Circuit ON/OFF SKU# 20231 PN 3000 Heavy Duty Battery Switch, Grey, 600A cont., 900A int., 32VDC. Positons: single-circuit on-off. 3.85”H x 3.85”W x 3.1”D.; Switches a single battery to a single load group. Meets American Boat and Yacht Council (ABYC) requirements for battery switches. Ignition protected. Safe for installation aboard gasoline powered boats. Case design allows surface or rear panel mounting. Accepts two 4/0 AWG (95mm²) battery cables.
Specifications: Cranking Rating :10 sec, 2,750 Amps
Blue Sea 3002 HD-Series Battery Switch Selector SKU# 20233 PN 3002 Heavy Duty Battery Switch, MFG# 3002, Grey, 500A cont., 700A int., 48VDC. Positions: 1-2-off-both. 3.85 in. H x 3.85 in. W x 3.1 in.D. Switches isolated battery banks to all loads or combines battery banks to all loads. Make-before-break contact design allows switching between battery banks without power interruption. Meets American Boat and Yacht Council (ABYC) requirements for battery switches. Ignition protected, safe for installation aboard gasoline powered boats.
Blue Sea 5511e e-Series Dual Circuit Plus Battery Switch SKU# 20964 Blue Sea 5511E, E-Series Battery Switch, Red, 350A cont., 525A int., 32VDC. Positions: two-circuit on-off with combiner. 3.85”H x 3.85”W x 3.1”D. Simultaneously switches two isolated battery banks or combines battery banks to all loads. Make-before-break contact design allows switching between battery banks without power interruption.Ignition protected, safe for installation aboard gasoline powered boats. Case design allows surface or rear panel mounting. Meets ABYC requirements.
Blue Sea 6007 m-Series (Mini) Battery Switch Selector Four Position Red SKU# 20505 Blue Sea 6007 Mini Battery Switch, Red, 300A cont., 500A int., 32VDC. Positions: 1-2-off-both. 2.83”H x 2.83”W x 3.1”D. With removable knob.Switches isolated battery banks to all loads or combines battery banks to all loads. Make before break contact design allows switching between battery banks without power interruption.Ignition protected—safe for installation aboard gasoline powered boats. Case design allows surface, front panel, or rear panel mounting. Isolating cover with snap-on section