Vertical Rope/Chain Windlass with Below-deck Motor
Maxwell's all new RC series windlasses proudly follow in the highly successful footsteps of the Freedom, Liberty and HRC fully automatic rope/chain anchor winches. RC10, RC8 and RC12 are available in both capstan and low profile versions. RC6 is available in low profile version only.
The all new stainless steel RC10/12 fully automatic windlass series is designed to effortlessly retrieve and deploy 8mm (5/16”) and 10mm (3/8”) short link chain and 14mm (9/16”) and 16mm (5/8”) three strand or 8-plait rope. RC12 will accommodate up to 3/4” rope.
Sleek, low profile and Max-grip capstan drum versions are available to suit individual user preference.
Simple two piece installation saves time and money and allows easy retrofitting without disassembly of the windlass. Unique spacer tube design allows installation through virtually any deck thickness and the multiple mounting positions and self aligning gearbox ensure optimal location of gearbox and motor in virtually all installation situations.
Full disassembly capability of top works utilising handle provided, a screw driver and an Allen key. No special tools required.
The RC10/12 is manufactured from marine grade chromed bronze for long term durability. The heavy duty stainless steel pressure arm, coupled with the unique rope/chain gypsy, is designed to effectively grasp the splice between rope and chain, giving the RC10/12 an unparalleled level of performance.
In combination with a longer, heavy duty, large wire diameter, stainless steel pre-loaded spring, the pressure arm always exerts maximum control pressure as it pivots on a trouble free brass bearing.
The RC10/12 works just as effectively with all chain rodes for those who desire a low profile, elegantly styled windlass on their foredeck.
Huge through-deck hawse pipe throat ensures easy entry of the rope/chain rode into and out of the anchor locker.
Cone type clutch/brake mechanism permits manual, free-fall anchoring.
Sealed oil bath and marine grade hard anodised, alloy gearbox provides high efficiency output drive via precision worm and wormwheel.
Mounting Type: Vertical, below deck motor
Lifting Capacity: 2500 lbs.
Speed Rating: 79'/min chain; 65'/min rope
Rope & Chain Size: 3/8'' chain; 5/8-3/4'' rope
Input Voltage: 12 VDC
Power: 1200 Watts
Dimensions: Above Deck: 3.5''; Below Deck: 10''; Motor offset: 10.75''; Wt: 44 lbs.; Max deck thickness: 4''
Other Functions: Manual crank handle included. Available foot switch and chain counter
Warranty: Three Years
Manuals & Downloads: No product manuals available.
In the Box:
Circuit breaker/isolator panel
Up/down remote control panel
Emergency crank/clutch release handle
Additional Items from Windlass | See More Items from Windlass Category.
Lewmar Dual Direction Contactor 12V PM LEW-0052507 Lewmar Dual Direction Contactor 12V PM LEW-0052507; These Lewmar Dual Direction Contactor Solenoids are accessories for Lewmar windlasses. For model numbers: Sprint 1500, Horizon Express, Horizon 1500
Lewmar Dual Direction Contactor 12V PM LEW-0052531 Lewmar Dual Direction Contactor 12V PM LEW-0052531; These Lewmar Dual Direction Contactor Solenoids are accessories for Lewmar windlasses. For model numbers; Sprint 600, 1000, Horizon 400, 600, 600F, 900, 900F
Lewmar Foot Switches; LEW 68000917, White, Up (Old P/N 68000614) Lewmar Foot Switches; LEW 68000617, White, Up; Lewmar covered foot switches for anchor windlasses are designed for use on the bow of any boat as a second switch station. Their rugged design controls operation of Lewmar windlass models with convenient foot control. A cover protects each switch from accidental operation, as well as salt and moisture. Switches are available in white or black, and two are required for proper operation.
Lewmar Foot Switches; LEW 68000918, White, Down (Old P/N 68000615) Lewmar Foot Switches; LEW 68000618, White, Down; Lewmar covered foot switches for anchor windlasses are designed for use on the bow of any boat as a second switch station. Their rugged design controls operation of Lewmar windlass models with convenient foot control. A cover protects each switch from accidental operation, as well as salt and moisture. Switches are available in white or black, and two are required for proper operation.
Lewmar Pro Fish 700H Anchor Windlass LEW-6656211107301 100% stainless steel and a chrome bronze gypsy, the Pro-Fish 700 embodies the durability and quality standard of all Lewmar Pro-Series products. All necessary mounting hardware is included. Automatic freefall and a 12V motor provide fast line speed. Five-year warranty. The 700H windlass accepts 1/2” thick rope and 1/4” G4 ISO chain.
Lewmar Pro Series 1000H Windlass LEW-6657011108102 For boats 20 to 45 feet, easy to install, 100 percent 316 stainless steel windlass housing. A manual recovery system is standard. Includes: windlass, base gasket seal, fast-mounting studs, installation wrench, rocker switch, contactor, and circuit breaker. Accepts 5/16 inch chain.
Lewmar Pro Series 700H Windlass LEW-6656011107301 Lewmar's Pro Series 700 Anchor Windlass is designed for boats between 20-38 ft (6-11.5m). DIY ready, easy to install 700H windlass is housed in 316 stainless steel, making it well protected and durable. A push-button control and a built-in manual emergency recovery system make anchoring easier than ever.
Lewmar V700 Vertical Windlass LEW-6670011107302 The Lewmar V700 Vertical Windlass features a 100% 316 stainless steel housing and a sleek flush-mount design that hides the motor down below. Winlass works at the push of a button with two built-in features that make it unique: motor protection and anchor lock. IP677 Rated (waterproof to 1 meter) Complete kit includes: windlass, base gasket seal, fast mounting studs, installation wrench, toggle switch and circuit breaker. For boats up to 35 ft.