Fault lights to indicate a malfunction in either the module or one of the sensors.
”Press to test” button for each channel indicates either an OK or Danger condition
The MB-2-R adds automatic bilge blower control. The blower is automatically started when a fume level of 16 to 20% LEL (lower explosive limit) is reached and remains on until fume level is safely lowered.
A 30 amp relay is standard.
The MB-2-R system also includes a test button at the display module to activate the warning lamp, alarm horn and blower motor
Alarm silence button deactivates the alarm horn calibrated to eliminate most nuisance alarms while allowing enough time to take action
Manuals & Downloads: No product manuals available.
Clipper MOBi Fob SKU# 42620 MOBi Fob. Waterproof fob uses standard AAA type batteries. Compact display size: 150 x 112 x 42mm. Fob weight:100 grams. Fob dimensions 77 x 47 x 38mm max with belt clip MFG #: CLZ-FOB
Clipper MOBi Man Overboard Indicator w/3 Fobs SKU# 42619 Technical Specifications: Failsafe transponder technology. Pin code identified. High contrast display with white backlight. Current consumption 50mA at 12V + 50mA for backlight. Complete with 3 MOBi fobs. Waterproof fob uses standard AAA type batteries. Compact display size: 150 x 112 x 42mm. Fob weight:100 grams. Fob dimensions 77 x 47 x 38mm max with belt clip. The MOBi is a state of the art, fail-safe transponder man overboard system. MFG #: CL-MOBI
Maretron Carbon Monoxide Detector f/SIM100-01 SKU# 39495 CLOSE OUT SPECIAL! •Attaches to Maretron SIM100 for NMEA 2000 network monitoring. •Real Test technology allows for functional testing in the field. •Trouble relay for circuit trouble or detector end of life notification. •Provides wiring supervision. •4-wire detector; mounts to wall or ceiling
Status: Close Out Special, Limited Supply
McMurdo Smartfind S20 SRS AIS MOB SKU# 47426 Smartfind S20 SRS AIS MOB McMurdo's Smartfind S20 Survivor Recovery System (SRS) is a personal AIS device worn on your lifejacket and activated by sliding off the safety tab and lifting the arming cap to deploy the antenna. The compact, lightweight unit sends alert messages, GPS position and a special identity code directly to AIS receivers within approximately a 4-mile radius. A flashing LED light aids location at night.