Overview No additional product overview available.
Manuals & Downloads: No product manuals available.
In the Box: No product box content available.
Additional Items from Sewage Waste Pumps | See More Items from Sewage Waste Pumps Category.
Jabsco 37202 Shower and Bilge Pump SKU# 31460 37202 Shower and Bilge Pump - Flow Rate: Nominal 13 Litres/min (3 USgallons/min). Self-priming from dry up to 2m (6ft). Features: Quiet running and fully corrosion resistant. Cosntructed from corrosion resistant materials. Supplied with pumpgard filter, MFG #: 37202-2012
Jabsco Filterless Bilger - Sink - Shower Drain Pump SKU# 31469 Shower Drain and Bilge Pump - Robust Single Diaphragm Design Sink & Shower Drain Pump. Flow rate: Nominal 16 Litres/min (4.2 US gallons/min)
Self-priming from dry up to 3m (10ft). Features: Flexible installation. No filter required. Dry running capability. Relevant Standards: ISO 8846 MARINE and USCG Regulations for Ignition Protection ISO 8849 MARINE Bilge Pump Standard. Built to ISO 15083 Specification. Meets BSEN 50081 MFG #: 50880-1000
Jabsco Filterless Waste Pump SKU# 31470 Waste Pump - Robust Single Diaphragm Design. Flexible installation. No filter required. Compact and simple design. Dry running capability. Connections for 38mm (1 1/2”) ports. Up to 19 lpm (5 US gpm) flow. Relevant Standards: ISO 8846 MARINE and USCG Regulations for Ignition. Protection ISO 8849 MARINE Bilge Pump Standard. Built to ISO 15083 Specification. Meets BSEN 50081 (Electro Magnetic Compatibility). MFG #: 50890-1000
Jabsco Macerator Pump - 115V SKU# 50782 115V AC Macerator pump unit is the ideal answer to waste handling problems for marine, recreational vehicle and domestic uses. Grinds waste down to a particle size of 1/8” maximum so it can be pumped easily through a 1” hose discharge line. Impeller Nitrile. Macerator Cast Bronze Cutter Plate. Seal Lip Type.Port Type Inlet - 1-1/2” External Pipe ThreadOutlet - 1” ID Hose Barb. Motor 115 Vac, AC Induction TypeSingle Phase, 60 HzThermal Overload Protection. MFG #: 18690-0000
Jabsco PAR-Max 3 Shower Drain Pump 12V 3.5 GPM SKU# 31436 PAR-Max 3 3.5 GPM Water System Pump. Shower Drain and General Purpose Pump. Features: Self-Priming. Runs Dry Without Damage. Smooth Flow. Four Piston, Diaphragm Sealed. Powerful Motor. Snap-In Swivel Ports. Meets USCG & ISO 8846 Ignition Protection Standards. MFG #: 31610-0092
Jabsco PAR-Max 4 Bilge/Shower Drain Pump 12V SKU# 31440 31705 Bilge and Shower Drain Pump. Bilge/Livewell/General Purpose Diaphragm Pump, 12v. Self-Priming from dry up to 2.4m (7.8ft). Run dry without damage. Smooth flow. Four piston, diaphragm pump. Powerful heavy duty motor with Thermal Overload Protection. Snap-in Ports.
Waterproof coating. Meets USCG Regulation 183.410 and EN ISO 8846 MARINE (Ignition Protection Standards). Meets EN 50081-1 Electro-magnetic Compatiblity.
Jabsco Par-Max Shower Drain/General Purpose Pump - 3.5GPM-25psi-12VDC SKU# 42530 PAR-Max Shower Drain Pump - w/Strainer 12 volt DC model, fuse 10 amp. New generation, long life fully serviceable shower drain pump. 3.5 gpm (13.2 lpm) at 3ft (1m) head. Self-priming up to 10ft (3m) allows mounting above wet bilges. Diaphragm design allows extended dry running. Continuous rated, heavy duty motor sealed for harsh bilge environments. Thermal overload protection automatically stops the motor if it overheats due to overloading, with auto re-start.
Jabsco Sealed Macerator Self-Priming Pump SKU# 31418 Sealed Macerator - Self-Priming Macerator Pump with Run-Dry Protection. Waste Evacuation: The Jabsco 18590 series DC macerator pump unit is the ideal solution for emptying marine holding tanks when not in a discharge restricted area. Self priming to 5ft this pump will empty a typical 30 gallon (115 Liter) holding tank in less than 3 minutes. Duty cycle of the pump is 15 minutes continuous, 180 gallon (680 liter) emptied in a single operation. MFG #: 18590-2092
Jabsco Self Priming Sealed Macerator Pump SKU# 34554 Run-Dry Macerator Waste Pump. WASTE EVACUATION - The Jabsco 18590 series DC macerator pump unit is the ideal solution for emptying marine holding tanks. Self priming to 5ft pump will empty a typical 30 gallon (115 Liter) holding tank in less than 3 minutes. Duty cycle of the pump is 15 minutes continuous. Inlet Port: 1-1/2” Hose Barb plus 1-1/2 NPT Discharge Port: 1” Hose Barb. MFG #: 18590-2094