Raritan Water Heater Thermostat Assembly WH16 SKU# 33903 - Water Heater Thermostat Assembly - Raritan's WH16 Water Heater Thermostat is located behind the rectangular electrical panel. For all Raritan water heaters.
Atwood EHM-11-220 Electric Water Heater w/Heat Exchanger - 11Gal - 220V SKU# 35886 Electric Water Heater w/ Heat Exchanger. Volt: 220v. Gallons: 11. Size: 15.8”H x 15.8”W x 19.8”D All 220/vac models carry the CE mark and comply with ISO 8846 ”Ignition Protection.” A unit for installation in a 75 P.S.I. system is available, but the water volume will be slightly less than 150 P.S.I. models.MFG #: 94555
Raritan 12-Gallon Hot Water Heater w/Heat Exchanger - 120V SKU# 33715 1700 Series Water Heater, 120v, 12 Gallon, With Engine Heat Exchanger. The ”1700 Series” water heater provides hot water for galley and shower. Dense foam insulation. Raritan's water heaters use an ignition protected thermostat. Factory set to 120°F, it is adjustable from 110° to 160°F and has a safety shut down limit of 190°F.Simple installation. Hot and cold water connections are 3/4” male NPT (National Pipe Thread). Heat exchanger connections 3/4” female NPT.
$1,026.96
Raritan 12-Gallon Hot Water Heater w/o Heat Exchanger - 120V SKU# 33716 1700 Series Water Heater, 120v, 12 Gallon, W/O Engine Heat Exchanger. The ”1700 Series” water heater provides hot water for galley and shower. Dense foam insulation. Raritan's water heaters use an ignition protected thermostat. Factory set to 120°F, it is adjustable from 110° to 160°F and has a safety shut down limit of 190°F.Simple installation. Hot and cold water connections are 3/4” male NPT (National Pipe Thread).
$846.04
Raritan 20-Gallon Hot Water Heater w/Heat Exchanger - 120V SKU# 33714 The ”1700 Series” water heater provides hot water for galley and shower. Dense foam insulation. Raritan's water heaters use an ignition protected thermostat. Factory set to 120°F, it is adjustable from 110° to 160°F and has a safety shut down limit of 190°F.Simple installation. Hot and cold water connections are 3/4” male NPT (National Pipe Thread). Heat exchanger connections are 3/4” female NPT.