Maxwell's all new HRC10 Horizontal Series represents yet another breakthrough in performance and anchor handling excellence. These horizontal, fully automatic rope/chain windlasses have been designed to meet the demands for use on larger vessels up to 16 metres (52 feet), which require a completely above deck installation system. The HRC10 flawlessly handles rope up to 16mm (5/8”) and chain up to 10mm (3/8”) in size, including the thick rope to chain splice. The modern appearance of the HRC10 Series retains the classic good looks of previous Maxwell horizontal windlasses, while incorporating design features years ahead of its competitors.
All HRC Series Windlasses Are Fitted With Maxwell's Unique Wave Design Chainwheel.
This patented rope/chain wheel incorporates two unique design concepts that greatly improve the handling and control of the rope/chain spliced rode. The outer ribs of the chainwheel are angled slightly forward ensuring that the rope and the chain are smoothly guided in the wheel during anchor retrieval. As the rope pulls into the wheel, the opposite facing inner ribs grip the rope in an undulating manner, securing the rope more firmly in a 'wave pattern' action that is far superior to the traditional 'jam cleat' manner of holding the rope. Not only does this Wave Design hold the rope more securely, it is also kinder on the rope resulting in increased longevity of your anchor rode.
The all new HRC10 fully automatic horizontal windlass series is designed to effortlessly retrieve and deploy 8mm (5/16”) and 10mm (3/8”) short link chain and 14mm (9/16”) and 16mm (5/8”) three strand or 8-brait (plait) rope.
The aesthetically pleasing above deck design, evolved from the philosophy of form follows function, encapsulates the motor and drive in a two part watertight case, saving space below deck.
The two part case consists of a die cast, marne-grade hard anodised alloy front section and a rugged and easily removable composite motor cover aft section.
This two piece watertight case allows for quick and easy, on-deck, routine maintenance.
Simple ”bolt down” installation ensures effortless and rapid on-deck installation and set up.
The stainless steel pressure arm always exerts maximum control pressure on the rode (rope, splice or chain).
The new and revolutionary patented Wave Design chainwheel is able to accommodate a wide range of chain pitch differences, within the specified chain size diameters, suitable for use with the HRC10 Series.
The unique Maxwell ”wrap around” horizontal chainwheel ensures that more than 90° of the wheel is used, allowing greatly improved rope and chain handling compared with competitor designs.
The HRC10 works just as effectively with all-chain rodes for those who desire the added security and holding power of an all-chain anchor system.
The integral chain pipe and huge, through deck hawse pipe throat ensures easy entry of the rope/chain rode into and out of the anchor locker.
Cone type clutch/brake mechanism permits manual, ”free fall” anchoring and emergency crank recovery of the rode and anchor if required.
The sealed oil bath and marine-grade hard anodised, alloy gearbox provides high efficiency output drive via precision worm and wormwheel.
Dimensions: 14.6''L x 12.1''W x 7.9''H; Wt: 25 lbs
Other Functions: Available foot switch and chain counter
Warranty: Three year
Manuals & Downloads: No product manuals available.
In the Box:
Circuit breaker/isolator panel
Dual direction control system
Up/down remote control panel
Emergency free fall activation lever
Additional Items from Windlass | See More Items from Windlass Category.
Lewmar Dual Direction Contactor 12V PM LEW-0052507 Lewmar Dual Direction Contactor 12V PM LEW-0052507; These Lewmar Dual Direction Contactor Solenoids are accessories for Lewmar windlasses. For model numbers: Sprint 1500, Horizon Express, Horizon 1500
Lewmar Dual Direction Contactor 12V PM LEW-0052531 Lewmar Dual Direction Contactor 12V PM LEW-0052531; These Lewmar Dual Direction Contactor Solenoids are accessories for Lewmar windlasses. For model numbers; Sprint 600, 1000, Horizon 400, 600, 600F, 900, 900F
Lewmar Foot Switches; LEW 68000917, White, Up (Old P/N 68000614) Lewmar Foot Switches; LEW 68000617, White, Up; Lewmar covered foot switches for anchor windlasses are designed for use on the bow of any boat as a second switch station. Their rugged design controls operation of Lewmar windlass models with convenient foot control. A cover protects each switch from accidental operation, as well as salt and moisture. Switches are available in white or black, and two are required for proper operation.
Lewmar Foot Switches; LEW 68000918, White, Down (Old P/N 68000615) Lewmar Foot Switches; LEW 68000618, White, Down; Lewmar covered foot switches for anchor windlasses are designed for use on the bow of any boat as a second switch station. Their rugged design controls operation of Lewmar windlass models with convenient foot control. A cover protects each switch from accidental operation, as well as salt and moisture. Switches are available in white or black, and two are required for proper operation.
Lewmar Pro Fish 700H Anchor Windlass LEW-6656211107301 100% stainless steel and a chrome bronze gypsy, the Pro-Fish 700 embodies the durability and quality standard of all Lewmar Pro-Series products. All necessary mounting hardware is included. Automatic freefall and a 12V motor provide fast line speed. Five-year warranty. The 700H windlass accepts 1/2” thick rope and 1/4” G4 ISO chain.
Lewmar Pro Series 1000H Windlass LEW-6657011108102 For boats 20 to 45 feet, easy to install, 100 percent 316 stainless steel windlass housing. A manual recovery system is standard. Includes: windlass, base gasket seal, fast-mounting studs, installation wrench, rocker switch, contactor, and circuit breaker. Accepts 5/16 inch chain.
Lewmar Pro Series 700H Windlass LEW-6656011107301 Lewmar's Pro Series 700 Anchor Windlass is designed for boats between 20-38 ft (6-11.5m). DIY ready, easy to install 700H windlass is housed in 316 stainless steel, making it well protected and durable. A push-button control and a built-in manual emergency recovery system make anchoring easier than ever.
Lewmar V700 Vertical Windlass LEW-6670011107302 The Lewmar V700 Vertical Windlass features a 100% 316 stainless steel housing and a sleek flush-mount design that hides the motor down below. Winlass works at the push of a button with two built-in features that make it unique: motor protection and anchor lock. IP677 Rated (waterproof to 1 meter) Complete kit includes: windlass, base gasket seal, fast mounting studs, installation wrench, toggle switch and circuit breaker. For boats up to 35 ft.