Icom HF Automatic SSB Antenna Tuner SKU# 10036 - Icom ST-130 Automatic antenna tuner, MFG# AT-130, matches the transceiver to a long wire or whip antenna with little insertion loss. Cable connections are easy to install. For M700PRO. 11”W x 15”H x 3.5”D; Wt: 20 lbs.
Suitable for many vessels - The versatile AT-130 can be used with a variety of vessels, even smaller boats that cannot use a long antenna element. For example, the AT-130 will match a 7 m (23 feet) long wire antenna across the marine band in the 1.6 - 27.5 MHz range.
Automatic tuning - No manual tuning is needed. Just push the [TUNE] switch on an Icom HF marine transceiver; the AT-130 adjusts the antenna and the transceiver to the minimum SWR in any frequency on an HF marine band. The AT-130 allows you to transmit with strong RF output power, and is perfect for maritime mobile operations.
Weather resistant - The AT-130 is housed in a durable, completely weather-resistant acrylic case with rubber gaskets. This allows it to be conveniently installed near the antenna element base.
For Icom HF marine transceivers - Icom's sophisticated AT-130 easily matches Icom HF marine transceivers. The AT-130 easily interconnects with an Icom HF marine transceiver. AT-130 installation is simple. No adjustments are necessary. Just connect the control cable and antenna wire and go!
Quick tune-up - Improved tuning performance...the tune-up time is less than 3 seconds in any frequency on an HF marine band. In addition, the AT-130 has 8 convenient memories to store tuning information. Retuning for a memorized frequency takes about 1.5 seconds. This allows you quick trouble-free frequency changes.
Low power tune-up - The AT-130 emits very little output power (just 300 mW) during the tuning process. This reduces the possibility of causing interference to other stations using the frequency.
Dimensions: 230(W) x 340(H) x 80(D) mm; 9.1(W) x 13.4(H) x 3.1(D) in (projections not included)
Weight: 2.7 kg; 6.0 lb
Usable Temperature Range: -30C ~ +60C
Rated Voltage: 13.6 V DC +/-15% (negative ground) (supplied from an Icom HF marine transceiver)
Current Drain (at 13.6 V DC): 2 A
Frequency Coverage: 1.6~30 MHz (with the antenna length 7 m (23 ft) or longer)
Input Impedance: 50 ohms (unbalanced)
Max. Input Power: 150 W (PEP)
Input Power During Tuning: 10 W
Auto Tuning Time: 1.5 sec. (returning for a memorized frequency), typically 2~3 sec. (when operating band has been changed)
Auto Tuning Accuracy: VSWR 2.0:1
Insertion Loss: 0.5 dB (with a 50 ohms load, after tuning)
Additional Items from SSB | See More Items from SSB Category.
Clipper Easy Navtex w/Antenna SKU# 51241 Easy Navtex is designed for panel mounting and is supplied with antenna, power cable and dust cover. Features: Non volatile program memory. 518 & 490 kHz operation with programmable channel switching. Display size: L-150mm, H-112mm, D-42mm. Compact panel mount display (stirrup mount bracket available). Large letters for easy viewing. Built in real time spectrum analyser. Very high contrast display with white backlight. Power save auto timer on backlight. MFG #: CL-ENT
Clipper Marine PC Navtex USB SKU# 48091 The PC Navtex USB is a two channel Navtex Receiver designed to operate on your personal computer. 518 and 490kHz message reception. 12 volt supply with low 27mA current consumption. Connects to standard Nasa Navtex antenna supplied. Supply voltage 10 to 16 volts DC. Dimensions 115 x 100 x 30mm. Antenna length 195mm (complete with 7 metre cable). Supplied with PC CD software, USB connection lead, fused power cable and active antenna. Compatible with Windows XP to 7. MFG #: CL-PCNAVUSB
Clipper Target Nav-Fax HF3/W SKU# 37800 Technical Specifications: Signal level indicator. Fully synthesised. Frequency range - 30Khz - 30Mhz. Modes - USB/AM/LSB. Single side band - 3.8Khz wide. 10 memory channels. AM - 6Khz wide. Audio output - 2 watts. Power supply - 12 volts DC. Power consumption - 300mA. Dimensions - Width 180mm, Height 58mm, Depth 170mm. CD software and interface cable for connection to a PC sound card. The software enables reception of weatherfax pictures, Radiotelex weather forecasts and Navtex. MFG #: HF3/W