The second generation 2000 watt model has been completely redesigned to include many of the same great features found in its high power counterpart. A key feature enhancement is ”Generator Support Mode” which enables the Freedom SW to supplement a generator when AC loads exceed the generator's capacity. The new generation models also feature improved AC transfer/AC input detection time, providing the ability to transfer AC loads to batteries in less than 10 milliseconds when the incoming grid or generator power is lost. Connected loads are almost unable to feel the power transition due to this quick transfer time. Both models are approved to UL458 with marine supplement, CSA, ABYC and FCC, Class B requirements.
NEW - PARALLEL AND SERIES STACKING Parallel stacking enables the Freedom SW inverter/chargers to double the AC output in inverter mode. Series stacking enables the Freedom SW inverter/chargers to generate 120/240 V split phase output. AC source must be split phase, requires Stacking Cable (part# 808-9005)
•Designed for a variety of mobile applications such as commercial, emergency and recreational vehicles, marine vessels, construction and military equipment.
•Pure sine wave output to operate sensitive electronics
•Parallel and series stacking capability
•Built-in transfer switch automatically transfers between inverter power and incoming AC power
•Power factor corrected multi-stage charger for fast, efficient charging
•Temperature compensated charging for all climate conditions
•Wide operating temperature range: 32°F to 122°F
•Ignition lockout prevents unnecessary battery drain when the alternator is not providing power*
•Adjustable low battery voltage cut-off
•Ability to charge batteries drained to extremely low voltage
•Conformal coated circuit boards for humid environments
•On/off remote control panel with 25' cable included
•Easy to install and easy to use
•Meets CSA, UL458 (with marine supplement), ABYC and FCC Part 15, Class B requirements
•Battery over-voltage and under-voltage protection
•Automatic overload protection
Manuals & Downloads: No product manuals available.
Charles 93-PS1230-A Power Supply - 12V - 30A SKU# 13669 Onboard equipment such as single side-band radios, radar rectifiers, halogen and other lighting systems require a constant DC voltage to operate, yet the source does not have to be batteries. Power supplies may be used to run this equipment. They provide a constant 14.4 volts DC and are lightweight, compact, clean, quiet and easy to install. Accepts variances in frequency, 45 to 65 Hz, and variances in AC input (120 VAC units: 90 to 135 VAC, 220 VAC units: 180 to 270 VAC) MFG #: 93-PS1230-A