CF-60 Relocation Kit (to be used on a blank tank) When purchasing a blank tank use Trionic custom fitting kit for water or holding tanks. Leak proof uniseal compression fittings are easily installed thru the exterior tank wall. Complete instructions are included. Kit can be used with either straight or 90º hose adaptors.
(1) 4” deck plate
(2) 1 ½ “ FPT compression fitting assemblies
(2) ½ FPT compression fitting assemblies
(1) 1 ½“ MPT plug
(1) ½” MPT plug
(6) Stainless steel mounting screws
DT-30 Holding Tank Pump-out Kit: Removes waste from top of holding tank. Eliminates sewage from sitting in discharge hose reducing chance of hose failure and odor problems. Hex head PVC flange allows easy installation and removal. Fits tanks up to 30” in depth. Easy to install - includes sealing ring that requires a 3” dia. hole.
Jabsco Type 3 Waste Management System Model #: 38110-0092 Holding Tank & Pump. External linear sensor for fast and accurate level sensing. Rugged 7.5 gal (38 liter) Polyethylene holding tank. Integral Run-Dry Macerator Waste Pump mounted on the tank. Touch-Pad includes macerator activation control with auto shut-off, the activation feature has 3 second delay to avoid accidental operation. Inlet port 1.5” hose barb. Dockside evacuation port 1.5. Illuminated level indication showing 8 level increments to full. Unit can be put into Sleep mode.
SP-2014 Super Premium Holding Tank, 14 gal. SP-2014 14 Gallon Capacity. Super Premium Tanks include the following fittings: 1/2 NPT x 5/8 barb vent assembly, inspection port, 1-1/2” inlet, 1-1/2” outlet (pumpout), vacuum relief valve. **Inlet, outlet and vent fittings can be rotated.
Optional overboard discharge available for $30 additional charge.
Note: Add 3 inches to overall tank height to accommodate fittings