YachtsOfStuff.com Connects Boaters
logon to YachtsOfStuff.com  Log In  |  register on YachtsOfStuff.com New Visitor
Search YachtsOfStuff.com Quick Search
YachtsOfStuff.com Connects Boaters, Merry Christmas and Happy Holidays
  December 13, 2017

Airmar DT812BV-235-N2 235 kHz Tilted Element™ Smart™ Sensor 12° Tilt Bronze NMEA 2000 SKU# 59744

Click to Enlarge Picture
Airmar DT812BV-235-N2 235 kHz Tilted Element™ Smart™ Sensor 12° Tilt Bronze NMEA 2000 SKU# 59744 - Airmar has taken its proven Tilted Element™ and broadband technologies and applied them to its leading line of Smart™ Sensors. The DT800 is a low-profile, retractable, thru-hull sensor that computes accurate depth and temperature data and sends it to any NMEA 0183 or NMEA 2000® display. The DT800 operates at a frequency of 235 kHz and can run simultaneously with other Airmar 50/200 kHz transducers on-board with no interference.
Manufacturer: Airmar
 
Airmar DT812BV-235-N2 235 kHz Tilted Element™ Smart™ Sensor 12° Tilt Bronze NMEA 2000 SKU# 59744
Our Price: $447.51 (US Shipping: $12.90)

Ask for international shipping.
Overview  |   Manuals & Downloads  |   In the Box     
Overview

Airmar DT812BV-235-N2 235 kHz Low Profile Tilted Element™ Smart™ Sensor 12° Tilt Bronze NMEA 2000

Airmar has taken its proven Tilted Element™ and broadband technologies and applied them to its leading line of Smart™ Sensors. The DT800 is a low-profile, retractable, thru-hull sensor that computes accurate depth and temperature data and sends it to any NMEA 0183 or NMEA 2000® display. The DT800 operates at a frequency of 235 kHz and can run simultaneously with other Airmar 50/200 kHz transducers on-board with no interference. The broadband ceramic delivers depth readings to 183M (600'), as well as accurate shallow-water readings in as little as 500 mm (1.6').

Airmar's Smart™ Sensors have embedded microelectronics - the transducer element and signal processor are only millimeters apart. The signal from the depth transducer is processed right inside the sensor itself. All that is needed to receive depth and temperature data is a single cable into a compatible device or display. Because the ceramic is tilted inside the housing, the transducer beam is oriented straight down, resulting in strong bottom echo returns and accurate depth readings. The retractable housing with a self-closing valve reduces water flow into the vessel when the transducer is removed for cleaning.

Smart™ Sensor Features

  • Enhanced depth performance
  • Maximum Depth Range: 180M (594')
  • Minimum range 0.5M (1.6')
  • Urethane face provides better sensitivity
  • Excellent high-speed performance
  • Fixed 20° tilt for 16° to 24° deadrise
  • Fixed 12° tilt for 8° to 15° deadrise
  • Fixed 0° tilt for 0° to 8° deadrise
  • NMEA 2000 output
  • 100 W RMS power
  • Frequency: 235 kHz
  • Cone: 12°
  • All models have depth and temperature
  • 235 kHz eliminates interference with fishfinders
  • Retractable insert provides ease of serviceability
  • Usable Shaft Length: 57mm (2.25”)
  • .6M(19.8') NMEA 2000® devicenet cable and connector
  • 51mm (2”) housing
  • Blanking plug included
  • Accommodates maximum hull thicknesses 54mm (2-1/8”)
  • Accommodates minimum hull thicknesses 6.3mm (0.25”)


  • Additional Items from Transducers  |  See More Items from Transducers Category.
    Image Product Description Price Order
    On-Line
    Airmar 117WR-1 Crows Foot Transducer Wrench SKU# 57145 Airmar 117WR-1 Crows Foot Transducer Wrench SKU# 57145
    Transducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut. Wrenches are constructed of 3/16” thick mild steel. They can easily be bent or modified to accommodate challenging installation locations. For use with: B117, B150, B744V, B744VL, B765C, SS555
    $39.99
    Airmar 117WR-2 Transducer Hull Nut Wrench SKU# 57080 Airmar 117WR-2 Transducer Hull Nut Wrench SKU# 57080
    A single-handed wrench to tighten the hull nut on 2” bronze and stainless steel housings. You can use wrench 117WR-4 to brace the housing when using this wrench. For use with: B117, B150, B744V, B744VL, B765C, SS555
    $43.56
    Airmar 117WR-3 Double Handle Transducer Wrench SKU# 57149 Airmar 117WR-3 Double Handle Transducer Wrench SKU# 57149
    Transducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut. Wrenches are constructed of 3/16” thick mild steel. They can easily be bent or modified to accommodate challenging installation locations. For use with: B117, B150, B744V, B744VL, B765C, SS555
    $63.92
    Airmar 117WR-4 Transducer Housing Wrench SKU# 57084 Airmar 117WR-4 Transducer Housing Wrench SKU# 57084
    A single-handed wrench that holds the main thru-hull housing via the 'wrench flats' on the side of the housing to facilitate tightening of the hull nut. For 2” bronze and stainless steel housings (P617V, B617V, SS617V). Use wrench 117WR-2 or 117WR-3 for the hull nut. *Note that this wrench will not fit on the CA500 camera housing.
    $41.02
    Airmar 164WR-1 Crows Foot Transducer Wrench SKU# 57148 Airmar 164WR-1 Crows Foot Transducer Wrench SKU# 57148
    Transducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut. Wrenches are constructed of 3/16” thick mild steel. They can easily be bent or modified to accommodate challenging installation locations. For use with: B164, SS164, B175C, SS164
    $48.84
    Airmar 164WR-2 Transducer Hull Nut Wrench SKU# 57083 Airmar 164WR-2 Transducer Hull Nut Wrench SKU# 57083
    A single-handed wrench to tighten the hull nut on B164, SS164 and SS264 housings. You can use wrench 164WR-4 to brace the housing when using this wrench. For use with: B164, SS164, SS264
    $66.41
    Airmar 164WR-3 Double Handle Transducer Wrench SKU# 57152 Airmar 164WR-3 Double Handle Transducer Wrench SKU# 57152
    Transducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut. Wrenches are constructed of 3/16” thick mild steel. They can easily be bent or modified to accommodate challenging installation locations. For use with: B164, SS164, B175C, SS264
    $82.03
    Airmar 175WR-4 Transducer Housing Wrench SKU# 57087 Airmar 175WR-4 Transducer Housing Wrench SKU# 57087
    A single-handed wrench that holds the main thru-hull housing via the 'wrench flats' on the top of the housing to facilitate tightening of the hull nut. Use wrench 164WR-2 or 164WR-3 for the hull nut. For use with: B164, B175, SS164, SS264. NOTE: the design of the housing for these transducers changed in June 2012. This wrench is for the newer design and has an internal width of 2-3/4”. If you need a wrench for the older designs then use the 164WR-4 instead, with an internal width of 2 7/16”
    $44.92
    Airmar 60WR-1 Crows Foot Transducer Wrench SKU# 57146 Airmar 60WR-1 Crows Foot Transducer Wrench SKU# 57146
    Transducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut. Wrenches are constructed of 3/16” thick mild steel. They can easily be bent or modified to accommodate challenging installation locations. For use with: SS60, B60
    $40.63
    Airmar 60WR-2 Transducer Hull Nut Wrench SKU# 57081 Airmar 60WR-2 Transducer Hull Nut Wrench SKU# 57081
    A single-handed wrench to tighten the hull nut on 2” bronze and stainless steel housings. You can use wrench 60WR-4 to brace the housing when using this wrench. For use with: B60, SS60
    $52.73
    See More Items from Transducers Category.
     
    Home  |  Browse  |  Search  |  Help  |  Advertise  |  Contact Us YachtsOfStuff.com Boating Supply
    Terms & Conditions
    Legal Notices
    Privacy Policy
    Report Problems
    © 2002-2017; S2ware, LLC; All rights reserved.