YachtsOfStuff.com Connects Boaters
logon to YachtsOfStuff.com  Log In  |  register on YachtsOfStuff.com New Visitor
Search YachtsOfStuff.com Quick Search
YachtsOfStuff.com Connects Boaters
  October 22, 2017

Airmar B164 1kW 20° Thru-Hull Transducer w/Blue Connector *No-Stock Item* SKU# 61942

Click to Enlarge Picture
Airmar B164 1kW 20° Thru-Hull Transducer w/Blue Connector *No-Stock Item* SKU# 61942 - Step up to a 1kW - Without a Fairing!Airmar has taken our innovative Tilted Element™ technology to a higher power. The 1kW, flush-mount, Tilted Element transducer is perfect for fast, trailered, tournament sportfishing vessels that cannot have a High-Performance Fairing. The flush-mounted, bronze housing protrudes less than 6.35mm (0.25”) outside your hull and can sit on trailer rollers and bunks with no damage at all.
Manufacturer: Airmar
*Non-Stock Item*
 
Airmar B164 1kW 20° Thru-Hull Transducer w/Blue Connector *No-Stock Item* SKU# 61942
Our Price: $1,006.26 (US Shipping: $12.90)

Ask for international shipping.
Overview  |   Manuals & Downloads  |   In the Box     
Overview

B164 1kW 20° Thru-Hull Transducer with Blue Connector

Step up to a 1kW - Without a Fairing!Airmar has taken our innovative Tilted Element™ technology to a higher power. The 1kW, flush-mount, Tilted Element transducer is perfect for fast, trailered, tournament sportfishing vessels that cannot have a High-Performance Fairing. The flush-mounted, bronze housing protrudes less than 6.35mm (0.25”) outside your hull and can sit on trailer rollers and bunks with no damage at all.

Low-profile protrusion below the hull - no affect on your boats running performance

The ceramic arrays are tilted inside the housing giving you the perfect vertical beam with maximum energy on what is directly below your boat. Take your fishfinder to the next power with this 1kW, Tilted Element transducer.

Features:

  • 1 kW (1,000 Watts) RMS Power
  • Frequency: 50/200 kHz
  • Cone: 50 kHz - 22° x 20° / 200 kHz - 6° x 6°
  • Maximum Depth Range: 50 kHz - 353M to 529M (1,200' to 1,800') / 200 kHz - 152M to 235M (500' to 800')
  • Engineered for center-console and trailered boats
  • Interfaces to any 600W or 1 kW echosounder
  • Bronze (B164) Housing
  • Depth and fast-response water-temperature sensor
  • Boat Size: 8M to 11M (25' to 35')
  • Usable Shaft Length: ~71mm (2.80”)
  • Fixed 20° tilted version for 16° to 24° hull deadrise
  • 10M Cable included


  • Additional Items from Transducers  |  See More Items from Transducers Category.
    Image Product Description Price Order
    On-Line
    Airmar 117WR-1 Crows Foot Transducer Wrench SKU# 57145 Airmar 117WR-1 Crows Foot Transducer Wrench SKU# 57145
    Transducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut. Wrenches are constructed of 3/16” thick mild steel. They can easily be bent or modified to accommodate challenging installation locations. For use with: B117, B150, B744V, B744VL, B765C, SS555
    $39.99
    Airmar 117WR-2 Transducer Hull Nut Wrench SKU# 57080 Airmar 117WR-2 Transducer Hull Nut Wrench SKU# 57080
    A single-handed wrench to tighten the hull nut on 2” bronze and stainless steel housings. You can use wrench 117WR-4 to brace the housing when using this wrench. For use with: B117, B150, B744V, B744VL, B765C, SS555
    $43.56
    Airmar 117WR-3 Double Handle Transducer Wrench SKU# 57149 Airmar 117WR-3 Double Handle Transducer Wrench SKU# 57149
    Transducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut. Wrenches are constructed of 3/16” thick mild steel. They can easily be bent or modified to accommodate challenging installation locations. For use with: B117, B150, B744V, B744VL, B765C, SS555
    $63.92
    Airmar 117WR-4 Transducer Housing Wrench SKU# 57084 Airmar 117WR-4 Transducer Housing Wrench SKU# 57084
    A single-handed wrench that holds the main thru-hull housing via the 'wrench flats' on the side of the housing to facilitate tightening of the hull nut. For 2” bronze and stainless steel housings (P617V, B617V, SS617V). Use wrench 117WR-2 or 117WR-3 for the hull nut. *Note that this wrench will not fit on the CA500 camera housing.
    $41.02
    Airmar 164WR-1 Crows Foot Transducer Wrench SKU# 57148 Airmar 164WR-1 Crows Foot Transducer Wrench SKU# 57148
    Transducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut. Wrenches are constructed of 3/16” thick mild steel. They can easily be bent or modified to accommodate challenging installation locations. For use with: B164, SS164, B175C, SS164
    $48.84
    Airmar 164WR-2 Transducer Hull Nut Wrench SKU# 57083 Airmar 164WR-2 Transducer Hull Nut Wrench SKU# 57083
    A single-handed wrench to tighten the hull nut on B164, SS164 and SS264 housings. You can use wrench 164WR-4 to brace the housing when using this wrench. For use with: B164, SS164, SS264
    $66.41
    Airmar 164WR-3 Double Handle Transducer Wrench SKU# 57152 Airmar 164WR-3 Double Handle Transducer Wrench SKU# 57152
    Transducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut. Wrenches are constructed of 3/16” thick mild steel. They can easily be bent or modified to accommodate challenging installation locations. For use with: B164, SS164, B175C, SS264
    $82.03
    Airmar 175WR-4 Transducer Housing Wrench SKU# 57087 Airmar 175WR-4 Transducer Housing Wrench SKU# 57087
    A single-handed wrench that holds the main thru-hull housing via the 'wrench flats' on the top of the housing to facilitate tightening of the hull nut. Use wrench 164WR-2 or 164WR-3 for the hull nut. For use with: B164, B175, SS164, SS264. NOTE: the design of the housing for these transducers changed in June 2012. This wrench is for the newer design and has an internal width of 2-3/4”. If you need a wrench for the older designs then use the 164WR-4 instead, with an internal width of 2 7/16”
    $44.92
    Airmar 60WR-1 Crows Foot Transducer Wrench SKU# 57146 Airmar 60WR-1 Crows Foot Transducer Wrench SKU# 57146
    Transducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut. Wrenches are constructed of 3/16” thick mild steel. They can easily be bent or modified to accommodate challenging installation locations. For use with: SS60, B60
    $40.63
    Airmar 60WR-2 Transducer Hull Nut Wrench SKU# 57081 Airmar 60WR-2 Transducer Hull Nut Wrench SKU# 57081
    A single-handed wrench to tighten the hull nut on 2” bronze and stainless steel housings. You can use wrench 60WR-4 to brace the housing when using this wrench. For use with: B60, SS60
    $52.73
    See More Items from Transducers Category.
     
    Home  |  Browse  |  Search  |  Help  |  Advertise  |  Contact Us YachtsOfStuff.com Boating Supply
    Terms & Conditions
    Legal Notices
    Privacy Policy
    Report Problems
    © 2002-2017; S2ware, LLC; All rights reserved.