The TotalBoat Trailer-Mounted Boat Lift is a safe, stress-free way to raise a boat weighing up to 10,000 pounds up to 12” above the bunks or rollers, by yourself. Do routine maintenance with your boat still securely attached to the trailer.
This simple but ingenious system uses four lifts attached to your trailer and positioned under the four strongest areas of the boat: hull chines, stringers, and transom. While raising the boat, it's easy to keep the load balanced by turning the adjustable rod on each lift one half turn at a time. As your boat lifts up off of the trailer, it remains stable and secure because the lifts are attached firmly to the trailer itself.
Sturdy, adjustable lifts are extremely easy to configure to accommodate a wide range of boat shapes and sizes. No more hoists or dangerous improvised solutions!
Important Fit Requirements:
The Trailer-Mounted Boat Lift System requires minimum clearance heights where each lift is mounted:
Make sure there is a minimum of 12” clearance from the ground to the bottom of your trailer frame. Additionally, the distance from the top of the trailer frame to the chines must be no less than 10”.
Boats with very low trailers and or low rise from the trailer to the boat may lack sufficient clearance. The lift is designed for use on trailer beams 2” to 3” wide and 4.5” to 5.75” tall.
•Constructed of solid steel, including handles and nuts, each lift stand has a lift capacity of 2,500 pounds (1,134 kg)
•1-7/16” ACME threaded center rod provides smooth adjustment under load
•Top plates swivel on ball joints with an 18° articulation in all directions
•Made and tested in the USA to ensure the best quality available to maximize safety
•Stands may be mounted either inside or outside the trailer piping.
•Stands have 2 (Short and Tall) configurations to suit different boat and trailer designs