Maretron's Fluid Pressure Monitor is used to adapt up to six pressure transducers to the NMEA 2000r network (pressure transducers sold separately). This allows you to observe fluid pressures and tank levels anywhere on the vessel where there are NMEA 2000r compatible displays. With the appropriate transducer, the FPM100 reports either pressure or vacuum for a variety of applications including water pressures, oil pressures, hydraulic pressures, or system vacuum for detecting clogged filters.
The FPM100 also has a tank level mode, so that fluid levels in a tank can be monitored via a pressure transducer mounted at the bottom of the tank and transmitted over the NMEA 2000r network. This allows you to monitor the fluid levels in tanks that are extremely deep, have internal structures, or are otherwise not suited for other tank level sensing technologies. In this mode, the FPM100 can be calibrated for irregular tank shapes so that you know the true level of the tanks.
The FPM100 is NMEA 2000r certified so you can view any and all information anywhere on the vessel using a compatible NMEA 2000r display. The FPM100 is a key component of Maretron's N2KViewr vessel monitoring and control system.
Adapts up to six pressure transducers to the NMEA 2000r network
Each channel independently programmed to match pressure transducer characteristics
Each channel independently programmed in pressure/vacuum mode or tank level mode
In Tank Level Mode, measures levels of extremely deep or irregularly shaped tanks
Compressed Air Pressure
User Defined Pressure Sources
Fuel Tank Level/Volume Remaining
Fresh Water Tank Level/Volume Remaining
Waste Water Tank Level/Volume Remaining
Manuals & Downloads: No product manuals available.
LM-200 Sensa Tank Marine 100 SensaTank Marine 100 is is everything you want in a sea-going partner. The SensaTank liquid-level monitoring panel is a new application of proven components from TouchSensor Technologies. It uses patented “Field-Effect” sensing technology to measure and display the levels of three non-fuel holding tanks. Features: 3 tank sensor. Reads through the tank. ”Plug and Go” wiring. ”Peel and Stick” sensors. No calibration needed, Indicates Full, 3/4, 1/2, 1/4, Empty. Panel 3.5” H x 5.5” W
MRTN-FPM100-01 Fluid Pressure Monitor, NMEA 2000 Maretron FPM 100 Fluid Pressure Monitor, MFG# FPM100-01, adapts up to six pressure transducers to NMEA 2000 network. Fluid level mode measures level by pressure at bottom of tank. Transducers sold separately.
MRTN-TLA100-01 Tank Level Adapter, NMEA 2000 Maretron Tank level adapter, MFG# TLA100-01, used to adapt commercially available resistive tank senders to NMEA 2000 network. Compatible with both the American standard (240-33 ohm) and the European standard (10-180 ohm) resistive senders.