Xantrex Freedom SW3012 12V 3000W Inverter/Charger SKU# 42935 - 12V, 3000W - 120 Vac / 60 Hz. Pure sine wave output to operate sensitive electronics Advanced configuration options for customized applications. Parallel and series stacking capability. Built-in transfer switch automatically transfers between inverter power and incoming AC power. Power factor corrected, multi-stage charger for fast, efficient charging. Temperature compensated charging for a vareity of climate conditions. MFG #: 815-3012
Status: Close Out Special, Limited Supply
The NEW GENERATION Freedom SW series represents highly sophisticated and advanced inverter/ chargers available in 3000 W with 150 A charger and 2000 W with 100 A charger models.
Product Description The second generation 3000 watt model has been completely redesigned to include many of the same great features found in its high power counterpart.A key feature enhancement is 'Generator Support Mode' which enables the Freedom SW to supplement a generator when AC loads exceed the generator's capacity. The new generation models also feature improved AC transfer/AC input detection time, providing the ability to transfer AC loads to batteries in less than 10 milliseconds when the incoming grid or generator power is lost. Connected loads are almost unable to feel the power transition due to this quick transfer time. Both models are approved to UL458 with marine supplement, CSA, ABYC and FCC, Class B requirements.
NEW - PARALLEL AND SERIES STACKING
Parallel stacking enables the Freedom SW inverter/chargers to double the AC output in inverter mode. Series stacking enables the Freedom SW inverter/chargers to generate 120/240 V split phase output2
2 AC source must be split phase, requires Stacking Cable (part# 808-9005)
Application Designed for a variety of mobile applications such as commercial, emergency and recreational vehicles, marine vessels, construction and military equipment.
Pure sine wave output to operate sensitive electronics
Advanced configuration options for customized applications
Parallel and series stacking capability
Built-in transfer switch automatically transfers between inverter power and incoming AC power
Power factor corrected, multi-stage charger for fast, efficient charging
Temperature compensated charging for a vareity of climate conditions
Ignition lockout feature helps prevent unnecessary battery drain when the alternator is not providing power3
Wide operating temperature range: -4°F to 140°F (-20°C to 60°C)
Conformal coated circuit boards for humid environments
Dual input / Dual output AC interface for 3000 W model
Ability to charge batteries drained to extremely low voltage
Compatible with the Xantrex Automatic Generator Start4 (Part# 809-0915)
3When used with the remote panel
Battery over-voltage and under-voltage protection
Automatic overload protection
Integrated, resettable AC breakers
Display: Alphanumeric LED indicator
Battery: Flooded, Gel, or AGM
Output Voltage: 150 Amps, 12 VDC
AC Connections: Hardwired, optional GFCI
Power: 3,000 Watts; 120 VAC; 60 Hz; true sine wave
Remote Options: Remote control panel included
Transfer Switch: Yes
Other Functions: May be series or parallel stacked (cable required)
Dimensions: 7.75”H x 13.5”W x 15.25”D; Wt: 74 lbs.
BDF70031 Fire Fly Oasis 12V 116 Amp Hr Carbon Foam - Group 31 Battery Flrefly Oasis 12V G31 Battery
Firefly’s award-winning, patented technology is an innovative material science that removes almost all limitations of current lead-acid battery products. Firefly discovered that much of the lead in the grid structure of conventional batteries can be replaced with a totally new type of grid material, carbon foam.
Blue Sea 3000 HD-Series Battery Switch Single Circuit ON/OFF SKU# 20231 PN 3000 Heavy Duty Battery Switch, Grey, 600A cont., 900A int., 32VDC. Positons: single-circuit on-off. 3.85”H x 3.85”W x 3.1”D.; Switches a single battery to a single load group. Meets American Boat and Yacht Council (ABYC) requirements for battery switches. Ignition protected. Safe for installation aboard gasoline powered boats. Case design allows surface or rear panel mounting. Accepts two 4/0 AWG (95mm²) battery cables.
Specifications: Cranking Rating :10 sec, 2,750 Amps
Blue Sea 3002 HD-Series Battery Switch Selector SKU# 20233 PN 3002 Heavy Duty Battery Switch, MFG# 3002, Grey, 500A cont., 700A int., 48VDC. Positions: 1-2-off-both. 3.85 in. H x 3.85 in. W x 3.1 in.D. Switches isolated battery banks to all loads or combines battery banks to all loads. Make-before-break contact design allows switching between battery banks without power interruption. Meets American Boat and Yacht Council (ABYC) requirements for battery switches. Ignition protected, safe for installation aboard gasoline powered boats.
Blue Sea 5511e e-Series Dual Circuit Plus Battery Switch SKU# 20964 Blue Sea 5511E, E-Series Battery Switch, Red, 350A cont., 525A int., 32VDC. Positions: two-circuit on-off with combiner. 3.85”H x 3.85”W x 3.1”D. Simultaneously switches two isolated battery banks or combines battery banks to all loads. Make-before-break contact design allows switching between battery banks without power interruption.Ignition protected, safe for installation aboard gasoline powered boats. Case design allows surface or rear panel mounting. Meets ABYC requirements.
Blue Sea 6007 m-Series (Mini) Battery Switch Selector Four Position Red SKU# 20505 Blue Sea 6007 Mini Battery Switch, Red, 300A cont., 500A int., 32VDC. Positions: 1-2-off-both. 2.83”H x 2.83”W x 3.1”D. With removable knob.Switches isolated battery banks to all loads or combines battery banks to all loads. Make before break contact design allows switching between battery banks without power interruption.Ignition protected—safe for installation aboard gasoline powered boats. Case design allows surface, front panel, or rear panel mounting. Isolating cover with snap-on section