With Built-in Loudhailer/Foghorn, NMEA 2000, and Remote Capability
With the plug-and-play functionality of NMEA 2000, the IC-M506 can easily connect to a NMEA 2000 network and interconnect with other equipment. Also the NMEA 0183 input/output can be used for external GPS/NAV interface.
The Icom M506 sets the standard for marine communications. With the large 3.4” LCD, reading GPS, AIS, DSC and radio menus are easier than ever. The bottom line of the display shows the software key functions and the functions can be toggled with the left and right buttons.
When connected to an external hailer horn, you can talk to people on the deck or shore from the radio’s microphone and can hear people’s reply via the hailer horn. Foghorn and RX speaker functions are also available.
The optional COMMANDMIC, HM-195B/SW provides 2nd station capability for using the IC-M506 from a separate cabin or tower. Most functions including DSC and AIS functions can be controlled from the COMMANDMIC and can be used as an intercom between the IC-M506 and the COMMANDMIC.
The built-in bidirectional active noise cancelling reduces background noise to up to 90% and improves both your transmitted voice and incoming call.
The last call voice recording function automatically saves the last two minutes of the last incoming call. You can also start recording manually.
The units is IPX8 submersible and can be fitted with an optional voice scrambler.
Display: 3.4” diag. LCD
Control Type: Rotary knob for channel change
Power: 25 Watts, 1 Watt
Remote Options: Full function Command Mic IV; Note: This version has the microphone connector on the rear for remote mounting (includes 20' cable)
Interface: NMEA 0183 in/out; NMEA 2000
Other Functions: 25 Watt 2-way loudhailer/fog horn (speaker required); optional voice scrambler; last call recording
Furuno VHF-AIS Splitter f/FA-30 Only SKU# 45498 FA-30 VHF-AIS Splitter
The VHF splitter enables the AIS receiver and VHF transceiver to share a single VHF antenna.
Note: The FA-30 can not receive AIS signal when the VHF transceiver is transmitting. MFG #: 000-011-704
GA-0100075411 VHF 100i, Basic, International Garmin VHF 100i, MFG# 010-00754-11, all channel, fixed mount VHF, 25/1Watt, rotary channel knob, Class D DSC, scan, dual watch, L/L display (GPS input required), channel-change mic. International version. With grey & black bezels.