Xantrex Freedom SW2024 Inverter/Charger - 2000W - 24V SKU# 43736 - Pure sine wave output to operate sensitive electronics. Advanced configuration options for customized applications. Parallel and series stacking capability. Built-in transfer switch automatically transfers between inverter power and incoming AC power. Power factor corrected, multi-stage charger for fast, efficient charging. Temperature compensated charging for a vareity of climate conditions. MFG #: 815-2024
The NEW GENERATION Freedom SW series represents highly sophisticated and advanced inverter/ chargers available in 3000 W with 150 A charger and 2000 W with 100 A charger models.
Product Description The second generation 2000 watt model has been completely redesigned to include many of the same great features found in its high power counterpart.A key feature enhancement is 'Generator Support Mode' which enables the Freedom SW to supplement a generator when AC loads exceed the generator's capacity. The new generation models also feature improved AC transfer/AC input detection time, providing the ability to transfer AC loads to batteries in less than 10 milliseconds when the incoming grid or generator power is lost. Connected loads are almost unable to feel the power transition due to this quick transfer time. Both models are approved to UL458 with marine supplement, CSA, ABYC and FCC, Class B requirements.
NEW - PARALLEL AND SERIES STACKING
Parallel stacking enables the Freedom SW inverter/chargers to double the AC output in inverter mode. Series stacking enables the Freedom SW inverter/chargers to generate 120/240 V split phase output2
2 AC source must be split phase, requires Stacking Cable (part# 808-9005)
Application Designed for a variety of mobile applications such as commercial, emergency and recreational vehicles, marine vessels, construction and military equipment.
Pure sine wave output to operate sensitive electronics
Advanced configuration options for customized applications
Parallel and series stacking capability
Built-in transfer switch automatically transfers between inverter power and incoming AC power
Power factor corrected, multi-stage charger for fast, efficient charging
Temperature compensated charging for a vareity of climate conditions
Ignition lockout feature helps prevent unnecessary battery drain when the alternator is not providing power3
Wide operating temperature range: -4°F to 140°F (-20°C to 60°C)
Conformal coated circuit boards for humid environments
Dual input / Dual output AC interface for 3000 W model
Ability to charge batteries drained to extremely low voltage
Compatible with the Xantrex Automatic Generator Start4 (Part# 809-0915)
Charles 93-PS1230-A Power Supply - 12V - 30A SKU# 13669 Onboard equipment such as single side-band radios, radar rectifiers, halogen and other lighting systems require a constant DC voltage to operate, yet the source does not have to be batteries. Power supplies may be used to run this equipment. They provide a constant 14.4 volts DC and are lightweight, compact, clean, quiet and easy to install. Accepts variances in frequency, 45 to 65 Hz, and variances in AC input (120 VAC units: 90 to 135 VAC, 220 VAC units: 180 to 270 VAC) MFG #: 93-PS1230-A