Renew, Restore, Protect your Inflatable Boat with SRC Tuff-Coat
SRC Tuff-CoatTM Inflatable Boat Repair Kit restores, renews and protects all hypalon inflatables in just two coats.
Thousands of satisfied Tuff-Coat customers have made their wornout Avon, Bombard, Caribe, Quicksilver, SeaEagle and Zodiac, inflatables completely seaworthy again.
Simply apply the base coat and then your top coat color. Your hypalon inflatable is good as new!
SRC Tuff-Coat Works great on PVC too!
Your tired, worn and leaking dinghy will look as good as new. Tuff-Coat is a two part inflatable boat paint that is applied directly to the worn PVC or Hypalon fabric. Thats correct. If you can paint you can restore your worn out, UV damaged inflatable boat with SRC Tuff-Coat boat paint.
So before you throw out that worn out inflatable boat - try Tuff-Coat to renew, protect and restore your dinghy back to life.
If you can paint, you can use Tuff Coat
In order to restore your inflatable boat, you donít have to know anything about a whole lot of stuff, except how to paint. Applying Tuff Coat is that simple.
Of course, you have to prepare your surface first, making sure itís clean. But thatís no big deal.
Tuff Coat can save you thousands of dollars!
Tuff Coat can restore virtually any kind of damage your hypalon inflatable boat may have suffered.
Tuff-Coat Inflatable Boat Paint is applied in two simple steps.
1. Preparation - Before attempting to apply any paint, it is absolutely critical that the surfaces be properly cleaned.
2. Base Coat - Paint or Spray
3. Top Coat - Paint or Spray
How Much Do I Need?
A Tuff-Coat Kit (contains one qt. Basecoat and one qt. Topcoat). This will cover approximately 40-60 sq ft per quart for base coat and 60-80 for topcoat.
For a 8 ft. inflatable you will need 1 "complete kit" to do the pontoons only. To cover the pontoons and the floor, you will need 1 extra quart of basecoat on top of the 1 "kit" you will require to do the pontoons.
For a 9 - 14 ft. inflatable you will need 2 Kits to do the pontoons only.
For a 15 - 17 ft. inflatable you will need 3 Kits to do the pontoons only.
For a 18 - 21 ft. inflatable you will need 4 Kits to do the pontoons only.
It is the basecoat that is the most important for covering rough areas, chafed areas, pinholes, etc, to build up the sealing/protective layer. The topcoat is the finishing layer to bring it to a beautiful appearance. This is why more basecoat is required when doing the floor also and when boats get larger.
If in doubt about your needs, especially if your boat is in rough shape with patches and chafed areas to cover, etc, you should order more paint as you do not want to get part way through your project and need more paint.
Both base and top coats will last over a year of shelf life so this offers you a quantity to have in case you require extra for repairs, touch-ups, etc in the future.