YachtsOfStuff.com Connects Boaters
logon to YachtsOfStuff.com  Log In  |  register on YachtsOfStuff.com New Visitor
Search YachtsOfStuff.com Quick Search
YachtsOfStuff.com Connects Boaters
  November 13, 2018
Home | YACHTSOFSTUFF.COM Postings
YachtsOfStuff,com Boating Gear
Also checkout this month's Sale
CLOSE OUT SPECIALS
$AVE While Supplies Last. Quantities Limited
TODD Boat Seating  Boss Audio Humminbird Fishfinders and Chartplotters Onyx Life Vest Clearance
 Sort By:   Part Name A-Z  |  Part Name Z-A  |  Price, Lowest - Highest  |  Price, Highest - Lowest  | Page    Next Page
Click on image for larger image. Description Price
(Shipping)
25lb Galvanised Hinged Plow Anchor 25lb Galvanised Hinged Plow Anchor
CLOSE OUT SPECIAL!
Sealock - 25Lb, (12Kg) hinged galvanised plow (CQR) anchor, brand new, inventory clearance, last one, never been used, SS shackle included. for most boats up to 30 feet. Shank Length: 26”. Blade Length: 16”. Blade Width: 12”
$170.00
($32.00)
ACR 2830 GlobalFix™ V4 GPS EPIRB - Category 1  SKU# 55931 ACR 2830 GlobalFix™ V4 GPS EPIRB - Category 1 SKU# 55931
CLOSE OUT SPECIAL!
The GlobalFix™ V4 EPIRB is a marine distress beacon with multiple built-in redundancies to increase your chances of survival in an emergency situation. The internal GPS will pin-point your location, which is transmitted on the 406 MHz distress signal which in the absence of GPS coordinates, can be used to triangulate your position.
$553.47
($12.90)
ACR RCL-100D Remote Controlled Searchlight - 12V SKU# 10001 ACR RCL-100D Remote Controlled Searchlight - 12V SKU# 10001
CLOSE OUT SPECIAL!
ACR RCL-100, Remote Control Searchlight (12V); 200,000cd; pitch control; Size: 8.0 x 9.0 x 8.0 in (20.3 x 22.9 x 20.3 cm) Weight: 7.2 lbs (3.2 kg). Salt water-resistant design includes triple- primed and sealed construction, nylon and phenolic washers, and aluminized stainless steel screws with insulating lubricant. Application: Sport yachts, mega-yachts, sport fish and commercial vessels. Twin high-intensity 55-watt Halogen bulbs.
$999.99
($12.90)
ACR RCL-100D Remote Controlled Searchlight - 24V SKU# 10007 ACR RCL-100D Remote Controlled Searchlight - 24V SKU# 10007
CLOSE OUT SPECIAL!
RCL-100D Searchlight, MFG# 1931.3, Includes URP-102 control pad. 24 VDC, Dual bulb, 200,000 candela, will accept up to 3 remotes. With 15' wire harness. Salt water-resistant design includes triple- primed and sealed construction, nylon and phenolic washers, and aluminized stainless steel screws with insulating lubricant. Application: Sport yachts, mega-yachts, sport fish and commercial vessels. Twin high-intensity 55-watt Halogen bulbs.
$999.99
($12.90)
ACR ResQLink+™ 406 MHz GPS PLB Floats w/o Pouch SKU# 43461 ACR ResQLink+™ 406 MHz GPS PLB Floats w/o Pouch SKU# 43461
CLOSE OUT SPECIAL!
Small and mighty, the ACR ResQLink+ is a buoyant, GPS-enabled rescue beacon designed for anglers, pilots and back country sportsmen. ResQLink+ PLB-375, MFG# 2881, 406 MHz Miniature Personal Locator Beacon with built-in GPS, strobe, 121 MHz homing beacon, and optional 406Link message service. 30 hr. battery, 1.6”W x 4.5”H x 1.9”D; Wt: 5.4 oz. Floats. MFG #: 2881
$294.71
($12.90)
Attwood Kayak Deck Bag SKU# 51001 Attwood Kayak Deck Bag SKU# 51001
CLOSE OUT SPECIAL!
Kayak Deck Bag. Attwood's Kayak Deck Storage Bag stores items for easy access while kayaking. The water resistant console fits safely and securely on your kayak deck. Offers zipper and stretch cord storage options. Reflective strips for low light visibility. Quickly mounts to deck rigging. Exterior storage options. Side pockets. Multiple D rings. MFG #: 11756-4 Elastic cord with hook included
$45.44
($10.80)
BARIGO Captain Series Barometer/Thermometer - Brass & Mahogany - 6” Dial SKU# 58126 BARIGO Captain Series Barometer/Thermometer - Brass & Mahogany - 6” Dial SKU# 58126
CLOSE OUT SPECIAL!
The CAPTAIN Series is made up of luxurious, generously sized wall instruments that meet all demands for function and design. High-gloss polished mohogany. Heavy, very solid glass tops with robust hinges and screw closure allow easy access to change the battery of the clock or to adjust the barometer. The cover is made of hand polished solid brass. Specifications: Dial Diameter: 5.9 in. (150mm) Housing Diameter: 8.3 x 2in. (210 x 50mm) Weight: 2.4lbs (1,100g)
$296.77
($12.90)
Barton Marine 21001 - Aluminum Winch Handle - 8” SKU# 46608 Barton Marine 21001 - Aluminum Winch Handle - 8” SKU# 46608
CLOSE OUT SPECIAL!
Aluminum Winch Handle - 8”. All designed to fit international star sockets and standard deck filler caps. Light duty, inexpensive handles w/easy-grip roller handle and 'Spectro' grey anodised finish. Important note: These handles should not be used on large, two-speed winches as they are not designed for high loads in an anti-clockwise direction. SWL 40kg (88.18lbs).
$62.89
($10.80)
Barton Marine 21034 - Floating Locking Winch Handle - 8” SKU# 46613 Barton Marine 21034 - Floating Locking Winch Handle - 8” SKU# 46613
CLOSE OUT SPECIAL!
Floating Handle - 8” Locking. Featuring a moulded body with an integral moulded handle shaft. Locking mechanism is with a positive, easy action thumb switch. Handle floats in salt and freshwater. Important note: Floating winch handles have a SWL of 40kg (88.18lbs) and are intended for lightweight use only.
$87.49
($10.80)
Barton Marine 21200 - Single Speed 8:1 Sheet Winch SKU# 46605 Barton Marine 21200 - Single Speed 8:1 Sheet Winch SKU# 46605
CLOSE OUT SPECIAL!
Composite Winches - Single Speed 8:1. Barton range of composite winches offer significant cost and weight savings and are truly low maintenance. Virtually self-lubricating, friction-free and corrosion resistant, the ingenious use of advanced materials ensure consistent performance and reliability. Suitable as primaries for yachts up to 10M (30') or as spinnaker/ halyard winches on larger craft. Red, blue and green coloured top rings included.
$139.18
($12.80)
Barton Marine 41140 - Lightweight Lazy Jack Kit - for Yachts up to 30’ SKU# 46623 Barton Marine 41140 - Lightweight Lazy Jack Kit - for Yachts up to 30’ SKU# 46623
CLOSE OUT SPECIAL!
Lightweight Lazy Jack Kit. Intended for smaller yachts or lightweight use. Not recommended for large yachts or fully battened mains. Allow mainsails to be reefed or dropped with ease, by retaining the sail between lines running from the mast (near the hounds) to the boom. Complete kits contain stainless steel, plastic-coated wires with blocks and fixing eyes attached. High quality braided line, all fixings and comprehensive fitting instructions included.
$202.69
($12.90)
Barton Marine 70100 - Mini ’K’ Cam Cleat SKU# 46640 Barton Marine 70100 - Mini ’K’ Cam Cleat SKU# 46640
CLOSE OUT SPECIAL!
'K' Cam Cleats - Mini, Manufactured from a composite Kevlar/Zytal material. Advanced material offers performance advantages over carbon fiber and conventional glass-reinforced resins; 'K' cams are very strong, lightweight and have excellent wear-resistance. Maximum holding power on all types of line. Minimum wear to both cam and line. Max Line diam.: 10mm (0.4”). Fastenings diam.: 4mm (0.16”). Fastenings Center: 30mm (1.18”). Holding Power: 190kg (419.9lbs).
$28.55
($10.80)
Barton Marine 81501 - DO 550 Double Rope Clutch SKU# 46644 Barton Marine 81501 - DO 550 Double Rope Clutch SKU# 46644
CLOSE OUT SPECIAL!
Double Rope Clutch. Max Rope Diameter:Up 12mm(0.47”). Fastening: 6mm x 4 (0.24” x 4). SWL:550kg (1212.54lbs). The Barton D0550 clutch is designed for cruising and racing yachts. Manufactured from modern lightweight materials to withstand the harsh marine environment. Moulded parts are from high grade plastics which are strong, light and impact-resistant. Cams and bases are from marine grade aluminium, 'Spectro' anodised for high wear resistance and long life.
$201.57
($12.90)
Barton Marine 90301 - Small Snatch Block w/Stainless Snap Shackle SKU# 46646 Barton Marine 90301 - Small Snatch Block w/Stainless Snap Shackle SKU# 46646
CLOSE OUT SPECIAL!
Small Snatch Block w/Stainless Snap Shackle. Unique to Barton, these are probably the smallest block of this type available. Extremely compact and strong, with a multitude of uses on cruising or racing yachts where a large unit is not required. Sheave: 35mm (1.38”). Sheave Width:17mm (0.67”). Rope: 12mm (0.47”). Break Load: 800kg (1,763.7lbs). SWL: 400kg (881.8lbs). Length: 110mm (4.33”). Weight: 170g (0.37lbs).
$108.56
($12.80)
Beckson 14x24” Flush Hatch Vertical or Horizontal - White SKU# 46415 Beckson 14x24” Flush Hatch Vertical or Horizontal - White SKU# 46415
CLOSE OUT SPECIAL!
Flush Mount Hatch. 1/2 inch Closed Height. Weather-Tight Seal. Opens full 180 degrees. Nothing to Snag Lines. One Hand Operation. Mounts Vertical or Horizontal. UV Stabilized Material. Invisible Fasteners. Textured Non-Skid Surface. O.D. 14” x 24” . I.D.10-1/2” x 20-3/8”. Hole Cut: 11-1/8” x 20-7/8”. MFG #: HT1424-W
$127.01
($12.90)
Bennett Dealer Service Kit SKU# 46263 Bennett Dealer Service Kit SKU# 46263
CLOSE OUT SPECIAL!
Dealer Service Kit. Save on Replacement Parts - Exclusively for stocking dealers and repair yards. The Dealer Service Kit includes a HPU, 4 actuators and a rocker control PLUS several of the most common replacement parts. MFG #: DSKIT
$675.66
($20.90)
Bennett Trim Tab Kit 12” x 9” w/Tab Position Indicator  SKU# 42713 Bennett Trim Tab Kit 12” x 9” w/Tab Position Indicator SKU# 42713
CLOSE OUT SPECIAL!
Trim Tab Kit w/TPI Control. Tab Size: 12” x 9”. Boat Length: 15'-19'. Trim Tab Kit contains two stainless steel trim tabs, two actuators, a hydraulicpower unit, Electronic Indicator Control(EIC) all necessary wiring, tubing, hardware and installation instructions. Tab Position Indicator Description: Attractive, compact, water resistant and easy to install. The TPI helm display accurately shows deflection percentage of each trim tab. MFG #: 129ETPI
$625.67
($22.90)
Bennett V351HPU1 Hydraulic Power Unit - 12V SKU# 16928 Bennett V351HPU1 Hydraulic Power Unit - 12V SKU# 16928
CLOSE OUT SPECIAL!
Bennett V351HPU1 Hydraulic Power Unit - 12 Volt. Compact powerhouse that creates hydraulic pressure to lower and raise the trim tabs. It employs two solenoid valves to direct the flow of fluid to the actuators. The solenoid valves lock tightly to secure the tabs in place. Strength to lower and hold even the largest tabs in place. Lexan cover protects electrohydraulic unit from occasional wash down. Measures 4” x 7 1/2” x 5 1/2”. MFG #: V351HPU1
$254.21
($12.80)
Bluefin DL6 Surface Mount Underwater LED Dock Light - 2500 Lumens - Blue SKU# 53371 Bluefin DL6 Surface Mount Underwater LED Dock Light - 2500 Lumens - Blue SKU# 53371
CLOSE OUT SPECIAL!
Piranha DL6 Surface Mounted underwater Dock Light Blue Topaz. Suitable for mounting on Docks, Marinas, Pontoons and water features Fixture Lumens 2,500. Typical LED life expectancy 50,000 + hours. Input power 33W. Voltage 12V, Power Draw 2.75 Amps. Over voltage, current, reverse polarity, active thermal protection. Fixture profile 2.36”. Fixture diameter 5.13”. Lens: optical grade high impact polymer, 60° beam angle. 2 year warranty.
$285.70
($12.90)
Bluefin DL6 Surface Mount Underwater LED Dock Light - 2500 Lumens - Diamond White SKU# 53370 Bluefin DL6 Surface Mount Underwater LED Dock Light - 2500 Lumens - Diamond White SKU# 53370
CLOSE OUT SPECIAL!
Piranha DL6 Surface Mounted underwater Dock Light Diamond White. Suitable for mounting on Docks, Marinas, Pontoons and water features Fixture Lumens 2,500. Typical LED life expectancy 50,000 + hours. Input power 33W. Voltage 12V, Power Draw 2.75 Amps. Over voltage, current, reverse polarity, active thermal protection. Fixture profile 2.36”. Fixture diameter 5.13”. Lens: optical grade high impact polymer, 60° beam angle. 2 year warranty.
$285.70
($12.90)
Bluefin S16 Thru-Hull Underwater LED Light - 5600 Lumens - Green SKU# 53384 Bluefin S16 Thru-Hull Underwater LED Light - 5600 Lumens - Green SKU# 53384
CLOSE OUT SPECIAL!
Stingray S16 Thru Hull Underwater Light Emerald Green. Suitable transom mounting. Surface mount, requires 25mm/1” cable entry hole. Recommended for boats upto 25M/80'. Fixture Lumens 5600. Typical LED life expectancy 50,000 + hours. Voltage 12/24V, Power Draw 3.8A@12V / 7.5A@24V. Over voltage, current, reverse polarity, active thermal protection.
$499.99
($12.90)
Bluefin S20 Thru-Hull Underwater LED Light - 9000 Lumens - Green SKU# 53387 Bluefin S20 Thru-Hull Underwater LED Light - 9000 Lumens - Green SKU# 53387
CLOSE OUT SPECIAL!
Stingray S20 Thru Hull Underwater Light Emerald Green. Suitable transom mounting. Surface mount, requires 25mm/1” cable entry hole. Recommended for boats upto 25M/80'. Fixture Lumens 9000. Typical LED life expectancy 50,000 + hours. Voltage 24V, Power Draw 7.5A. Over voltage,current,reverse polarity,active thermal protection.
$428.56
($12.90)
C.E. Smith 40” L.E.D. Post Boat Guide-On SKU# 35421 C.E. Smith 40” L.E.D. Post Boat Guide-On SKU# 35421
CLOSE OUT SPECIAL!
Long lasting, waterproof and shockproof, one piece red and amber LED lamps. The LED lamps make it easy to see your trailer's position when backing down the ramp and dramatically increase your trailer's visibility over the road at night. Amber light faces front, red faces rear. For trailer frames up to 3”W x 4 1/4”H. Sold in pairs. 40” Total Height. Adjusts Out to 13” each Side. Fits Frames up to 3”W x 4-1/4”H. 1-1/2” sq. 16 ga Pre-Galvanized Steel post.
$91.65
($14.90)
C.E. Smith 75” Guide f/I-Beam Mounting SKU# 49864 C.E. Smith 75” Guide f/I-Beam Mounting SKU# 49864
CLOSE OUT SPECIAL!
Extra tall Post Guide-Ons allow you to see the location of your trailer under water. Designed for I-beam trailers and I-beam boat lifts, two-piece mounting clamp that works above or below the I-beam. Fits I-beams up to 4” wide with provided hardware. Mounting hardware included. Sold in pairs. Adjusts out to 19” on each side. Fits frames up to 3”W x 5-1/4” H. 1-1/2” square, 16 gauge pre-galvanized steel uprights, 36” high. 2-3/8” diam. white PVC posts. MFG #: 27635
$126.30
($18.90)
C.E. Smith 75” Post Guide-On w/Unlighted Posts f/U-Bolt Mounting SKU# 53831 C.E. Smith 75” Post Guide-On w/Unlighted Posts f/U-Bolt Mounting SKU# 53831
CLOSE OUT SPECIAL!
Post Guide-Ons allow you to see the location of your trailer when it's under water. The 2” PVC tubes make it easy to see your trailer's position when backing down the ramp. Mounting hardware included. Sold in pairs. Adjusts out to 19” each side. Fits frames up to 3” W x 5-1/4” H. 1-1/2” square, 16 gauge pre-galvanized steel uprights. 2-3/8” diameter white PVC posts. MFG #: 27636
$128.36
($18.90)
C.E. Smith Adjustable Mid Mount Rod Holder f/1-5/16” OD - Silver SKU# 29080 C.E. Smith Adjustable Mid Mount Rod Holder f/1-5/16” OD - Silver SKU# 29080
CLOSE OUT SPECIAL!
Clamp angle adjusts in 10° increments. Hidden angle-adjusting teeth. Finish: Silver. Mount: Adjustable Mid. 1-1/4”, 1-5/16” measured outside diameter. Set the clamp to any position in 10° increments to angle your rod exactly where you want it. Strong four-screw mounting clamp resists slipping. Includes a heavy vinyl liner to protect rods and features an integrally-cast gimbal pin for strength. MFG #: 53651A
$138.92
($12.80)
C.E. Smith Adjustable Mid Mount Rod Holder f/7/8” OD Tube w/Sleeve - Silver SKU# 29078 C.E. Smith Adjustable Mid Mount Rod Holder f/7/8” OD Tube w/Sleeve - Silver SKU# 29078
CLOSE OUT SPECIAL!
Adjustable in 10 degree increments, so you can angle your rod exactly where you want it. And these investmentcast 316 stainless steel clamp-on rod holders feature invisible adjustment for great looks. Strong four-screw mounting clamp resists slipping. Includes a heavy vinyl liner to protect rods and features an integrally-cast gimbal pin for strength. Clamp angle adjusts in 10° increments. Hidden angle - adjusting teeth. MFG #: 53650A
$114.85
($12.80)
C.E. Smith Flush Mount Rod Holder - 0 Degree SKU# 29087 C.E. Smith Flush Mount Rod Holder - 0 Degree SKU# 29087
CLOSE OUT SPECIAL!
100% 316 stainless steel, these flush mount gunnel rod holders feature an extra large, low profile cap to enhance the appearance of any boat.They feature a super tough stainless steel gimbal bar welded in place designed to hold up to the punishment of downriggers or heavy tackle. A white vinyl liner protects rods, keyed with gimbal bar.. Standard 70 Series models have a tube depth of 9”, and I.D. of 1-5/8”. ANGLE: 0° LENGTH: 9” I.D.: 1-5/8”
$65.49
($11.80)
C.E. Smith Flush Mount Rod Holder - 15 Degree 10.5” Deep SKU# 29091 C.E. Smith Flush Mount Rod Holder - 15 Degree 10.5” Deep SKU# 29091
CLOSE OUT SPECIAL!
80C series models feature a beautifully rounded cast bottom end with a 1/2” Pipe Threaded Drain Hole. Use them when the bottom of the rod holder must have a decorative appearance, or use when there is dry storage space under the rod holder. Super tough cast stainless steel gimbal bar designed to hold up to the punishment of downriggers or heavy tackle. A white vinyl liner protects rods and is keyed with the gimbal. ANGLE: 15° LENGTH: 10-1/2” I.D.: 1-7/8”
$97.28
($12.80)
C.E. Smith Flush Mount Rod Holder - 15 Degree 9” Depth SKU# 33227 C.E. Smith Flush Mount Rod Holder - 15 Degree 9” Depth SKU# 33227
CLOSE OUT SPECIAL!
70C series models feature a beautifully rounded cast bottom end with a 1/2” tapered pipe threaded drain. Use them when the bottom of the rod holder must have a decorative appearance, or use when there is dry storage space under the rod holder. Super tough cast stainless steel gimbal bar designed to hold up to the punishment of downriggers or heavy tackle. A white vinyl liner protects rods and is keyed with the gimbal. ANGLE: 15° LENGTH: 9” I.D.: 1-5/8” MFG #: 53671C
$76.38
($12.90)
Page 1 of 4
Page:  1  [2]  [3]  [4
If your your order includes Shipping "TBD" - You will receive shipping estimate for your approval during order review.
Contact YOS directly to buy:  Phone: (401) 580-4956, Monday thru Friday, 8 am to 6 pm EST. Saturday 9 am to 2 pm.
 Fax: (941) 580-5840
 Email: YOS@YachtsOfStuff.com
Or, register, log on and  part match to postings.
YachtsOfStuff.com has been reliably serving boaters since 2002.
Credit Cards
YachtsOfStuff.com connects boater.
 
Home  |  Browse  |  Search  |  Help  |  Advertise  |  Contact Us YachtsOfStuff.com Boating Supply
Terms & Conditions
Legal Notices
Privacy Policy
Report Problems
© 2002-2018; S2ware, LLC; All rights reserved.