Redesigned, High Performance, Worldwide Charging
Xantrex TRUECHARGE™2 20Amp & 40Amp Battery Chargers lead the industry with a small footprint and ultra-compact design.
Product Info
In addition to meeting global safety and regulatory standards, TRUECHARGE2 Battery Chargers feature low electrical interference and superior, efficient, power factor corrected multistage charging.
TRUECHARGE2 Battery Chargers can be mounted virtually anywhere, given their unique drip-proof design. With certified ignition protection, even a gasoline engine room is an alternative for installation*. Trouble-free installation is ensured with easy-to-access AC and DC wiring compartments and reverse-polarity battery protection.
Designed primarily for marine and commercial applications worldwide, TRUECHARGE2 Battery Chargers are unmatched for reliability. Available in two 12-volt models, they are versatile enough to be used in a wide variety of conditions and locations. Auto-ranging AC input voltage capability (90 - 265 volts AC) makes traveling abroad and handling poor-quality power a breeze. The easy-to-read display can be augmented with an optional remote panel.
Three settings or optional remote battery temperature sensor
Charger efficiency
> 80%
Battery type
Gel, Flooded, AGM and Pb-Ca
Recommended battery size
100 Ah to 400 Ah
General Specifications
Operating temperature
2 0 to 65°C
Storage temperature
-40 to 80°C
Battery connection
Three positive terminals
One negative terminal
Dimensions
(H x W x L) 2.8 x 6.7 x 9.8"
(70 × 170 × 250mm)
Weight
4.8 lb (2.2 kg)
Warranty
Two year
Part Numbers
804-1220
804-1240
Remote Panel
808-8040-00
Battery Temperature Sensor
808-0232-01
Regulatory & Environmental Compliance
CSA E60335-2-29, UL1564, and UL1236 including the Marine Supplement, drip test, and Ignition Protection ratings. CE Marked for the Low Voltage Directive
(safety) and the EMC Directive. Complies with IEC 60335-2-29 including Australian deviations. Ingress protection rating IP32 per EN/IEC 60529. Complies with FCC Part 15B and Industry Canada ICES-003 Class B emissions limits. Complies with ABYC A-31.
1 90 - 105 Vac ± 4 Vac output de-rated to 80% of full load current.
2 Between 50° and 65°C DC output current de-rated. Highly Accelerated Life Tested (HALT) to -20°C.
Note: Specifications subject to change without notice.
Three-Stage Charging
Multistage charging ensures batteries receive optimum charging, but with minimal wear and tear, regulating the voltage and current delivered to the batteries in three automatic stages:
- Bulk: Replaces 70-80% of the battery’s state-of-charge at the fastest possible rate.
- Absorption: Replenishes the remaining 20-30% of charge, bringing the battery to a full charge at a slow, safe rate.
- Float: Voltage is reduced and held constant in order to prevent damage and maintain batteries at a full charge.
Power Factor Corrected (PFC)
Less shorepower is required for charging batteries, freeing up more usable AC power for running electrical devices and appliances and reducing the likelihood of tripping shorepower breakers.
Xantrex
Item/Image
Description
Price
Order On-Line
XAN-804-1220 TrueCharge2 20A, 12VDC - 3 bank
XAN-804-1220 TrueCharge2 20A, 12VDC - 3 bank
$248.56
XAN-804-1240 TrueCharge2 40A, 12VDC - 3 bank
XAN-804-1240 TrueCharge2 40A, 12VDC - 3 bank
$335.16
XAN-809-0910 Xantrex System Control Panel (SCP)
XAN-809-0910 Xantrex System Control Panel (SCP) LCD system display, control and diagnostic
$238.37
XAN-805-2000 PROsine 2.0 kW with 12 volt DC
XAN-805-2000 PROsine 2.0 2000 watts of true sine wave AC power from a DC source and 100-amp multistage battery charging.
$1,490.92
XAN-805-2020 PROsine 2.0 kW with (Hardwire & GFCI)
XAN-805-2020 PROsine 2.0 kW with 12 volt DC input, 2000 watt, 100A charger with (Hardwire & GFCI)
$1,532.29
XAN-808-1800 PROsine remote interface kit
XAN-808-1800 PROsine remote interface kit for PROsine 1000/1800
$59.89
Shipping charge is for continental US only ** Please ask for international or expedited shipping.
Contact YOS directly to buy:
Phone: (401) 580-4956, 8 am to 6 pm EST, Monday thru Saturday. Fax: (941) 580-5840 Email: YOS@YachtsOfStuff.com
Or, register, logon and
part match to postings below.
YachtsOfStuff.com has been reliably serving boaters since 2002.
Log In or Register to Post, Sell, Purchase, Contact, Inquire and Select Items.
Flush Mount Stainless Steel Dinghy Davits
Davits feature flush mount installation and double pulley system with cleat for locking in place. 304 stainless steel construction. The davit can swivel as necessary then lock into place for use. Includes block, hooks and rope. Two sizes available; Large - Max Weight 340lbs and Small - Max. Weight 275lbs. See Flush Mount Dinghy Davit page for more info.
AnchorSuit is a neoprene wet suit type cover for the fluke anchor, which softens all impact points of the anchor. AnchorSuitTM was created to prevent the anchor from causing damage and injury to boats and boaters alike. Available in 3 sizes, and two colors. See AnchorSuit page for more info.
Plush yet durable Boat Mats have a non-skid rubber backing. They’re mold and mildew resistant and highly UV protected. Mats can be personalized in your choice of font style and design layouts.
See Boat Mats page for more info.
Deluxe fender covers are made with "Ultra-V-Tex", a highly abrasion and UV resistant material that is soft and supple to your boat finish. Covers can be personalized with your boat name. For fenders with Hole Thru the Middle or Twin Eye.
See Boat Fender Cover page for more info.
MORE THAN A LIFEJACKET- Combines performance, style and versatility!
Offers complete non-restrictive movement, unmatched comfort and exceptional style with dynamic versatility to adjust to a variety of weather conditions. The set includes THREE products all in one; a jacket, a vest, and an automatic inflatable PFD liner. See Float Tech page for more info.
Larger 15in X 20in platform
Adjustable solid supports for either above or below the platform at any transome angle.
Available with wire rope supports to fold flush into the transom when not in use
Will support 300lbs as long as you have a solid backing plate mount to your boat See Swim Platform page for more info.