|
|
|
|
 |
| Rutland 913 Windcharger - World-wide popularity, easy to install and use wind powered generator. Thousands of Rutland wind generators are the choice of boat owners for quiet and reliable performance. A YachtsOfStuff.com representative can help give you complete support for selection, installation and maintenance of your Rutand 913 Wind Generator System.
|
Rutland 913 - Compact, Quiet, High Output, Reliable
 Data Sheet
|
Low wind speed output: The Rutland 913's high inertia generator starts producing power at 4 MPH. At 10MPH it produces 2 amps@12v and 4 amps at 15 MPH increasing to 7.5 amps at 22 MPH. The Rutland 913 outperforms all others in real cruising conditions yet withstands gale force winds unattended.
|
| Quiet - The Rutland 913 produces only 75dB at 11 knots, by far the quietest generator on the market.
|
| Size - 36" blade diameter won't dominate the stern area of your boat, less windage and weight aloft. Easy installation on mizzen masts or stern post.
|
| Reliable - The Rutland 913 features marine grade materials and stainless steel fittings. The 3 phase generator windings are completely sealed in GRP. Advanced, computer designed, aerofoil blades are built to withstand loading 10x the turbine's maximum rpm. The Rutland 913 is manufactured by Marlec Engineering Co Ltd. Marlec has been building wind chargers and distributing worldwide since 1979 and have ISO9001 accreditation. Installation of the charger and the recommended shunt/regulator can easily be completed in 3- 4 hours. The Rutland 913 requires very little maintenance and has a 24 month warranty.
|
|
| Rutland 503 Windcharger
|
Rutland 503 WIncharger
Mounting pole not included
Data Sheet
|
A completely unique mini windcharger designed with the weekend yachtsman in mind. The Rutland 503 is ideal for trickle charging batteries on board vessels less that 10m in length with battery banks of up to 100Ah. This latest model follows the success of its predecessor the Rutland 500 with a number of enhancements including performance and styling.
|
| "Safety turbine" is a single injection moulding of 6 aerofoil blades protected by an outer ring.
Trickle charges in windspeeds as low as 5 Knots
Produces 25w in 19 Knots
Produces up to 60w, nominally 5A @ 12V in 50 Knots
Stainless steel fasteners and marine grade materials
Turbine diameter of 500mm
Compact turning radius of just 225mm, great for when space is at a premium
Latest design improvements - the Rutland 503 is more reliable and efficient than ever!
No radiated interference - complies fully with BS EN5008-1 1992
|
|
| Wind Charger Mounting Wind Charger can be mounted using a short pole on an arch, a mizzen mount, or a stand alone pole. Wind Charger mounts on a 1 5/8" (41mm) ID pole with length sized high enough to prevent anything, including fingers, from getting caught in it. Pole kits are available from YachtsOfStuff.com. Pole kits require struts and bases sized to fit your boat. We also have a list of custom stainless steel suppliers for mounting hardware. See OMS Wind Generator Mounts for a comprehensive install package.
|
|
Wind Generator Shunts and Controllers
A Shunt/Controller is needed for any battery re-charging to regulate and control the power to single or multiple battery. A regulator let's you know when the battery is charging and the level of charge. |
Dimensions: 3" wide x 5 7/8" high x 1 3/8" deep
|
HRS Shunt Regulator features Pulse Width Modulation (PWM) technology, two tri-colour indicator LEDs for charging status and battery voltage, charge tapering to limit current and avoid battery overcharge, built-in blocking diode protects the HRS and Windcharger from other charge sources. The HRS is designed for a single battery bank and for use with the Rutland 913 plus up to 100w of solar. It is designed to be wall mounted and has a simple 3 wire flying lead connection.
|
Dimensions: 5 3/8" wide x 6 1/4" high x 2 3/8" deep (3" including control knob).
|
Rutland HRDX Charge Controller featurers Pulse Width Modulation (PWM) technology, windcharger and solar panel input, dual battery output, selectable LCD display for complete battery management control, charge tapering to limit current and avoid battery overcharge, and standard regulator cut-in level at 13.8V and fully on at 14.4V for 12V systems. Built-in charge splitter for 2 isolated battery banks. 5 position switch for LCD digital display of Windcharge current, Solar current, Net charge current, Battery 1 voltage and Battery 2 voltage, and a source shutdown switch. The HRDX is wall mounted and designed for use with the 913 plus up to 100w of solar panels.
|
|
| Order On-Line
|
|
|
|
|
| Contact YOS directly to buy:
|
Phone: (401) 580-4956, 8 am to 6 pm EST, Monday thru Saturday.
Fax: (941) 580-5840
Email: YOS@YachtsOfStuff.com
|
|
| Or, register, logon and
part match to postings below.
|
| YachtsOfStuff.com has been reliably serving boaters since 2002. |
|
|
 |
|
 |
Log In | 
Log In or Register to Post, Sell, Purchase, Contact, Inquire and Select Items.
More Postings from yachtsofstuff
Rutland 913 Windcharger
Easy Installation Mount; 
