XAN-82-0123-01 Echo Charge for 12 and 24 volt systems *Nonstock item* Xantrex digital echo~charge (part#82-0123-01) is designed to charge auxiliary or starting batteries from an inverter/charger or other charging source with limited voltage drop. The Xantrex echo~charge detects when the house battery bank is being charged and directs a portion of the charge current to auxiliary or starting batteries. The maximum charger current offered by echo~charge is limited to 15 amps. MFG# 82-0123-01.
Xantrex BTS Battery Temperature Sensor - XC & TC2 Chargers SKU# 26260 Battery Temperature Sensor (BTS) - Designed for use with TRUECharge2 battery chargers. The BTS mounts on a terminal post of a battery in a bank or on the side of a battery and measures its temperature. It sends precise information to the charger or charge controller, which automatically adjusts voltage to help ensure full battery charge depending on the ambient temperature of your battery installation.MFG #: 808-0232-01
Xantrex Freedom HF 1000 Inverter /Charger SKU# 32002 Xantrex compact inverter/charger to power the comforts of home on your boat, RV or Turck. With modified sine wave output, Freedom HF 1000 inverter/charger is designed to run entertainment systems and small appliances in smaller boats, RV's and trucks. Freedom XMIC inverter/charger is the smallest, lightest and least expensive model in the Xantrex lineup.Freedom HF is designed for demanding Marine & RV conditions.
Xantrex Freedom SW3012 12V 3000W Inverter/Charger SKU# 42935 12V, 3000W - 120 Vac / 60 Hz. Pure sine wave output to operate sensitive electronics Advanced configuration options for customized applications. Parallel and series stacking capability. Built-in transfer switch automatically transfers between inverter power and incoming AC power. Power factor corrected, multi-stage charger for fast, efficient charging. Temperature compensated charging for a vareity of climate conditions. MFG #: 815-3012 Status: Close Out Special, Limited Supply
Xantrex LinkLITE Batttery Monitor SKU# 33711 Battery Status at a Glance. Defining the amount of energy available in a battery is a complex task since battery age, discharge current and temperature all influence the actual battery capacity. High performance measuring circuits, along with complex software algorithms, are used to exactly determine the remaining battery capacity. A new shunt selection feature enables the LinkLITE to measure currents up to 1,000Amps respectively.
Xantrex LinkPRO Battery Monitor SKU# 33550 Xantrex LinkPRO selectively displays voltage, charge and discharge current, consumed amphours, remaining battery capacity and the time remaining of your battery bank. Using a clear backlit LCD Display and an intuitive user interface, all parameters can be recalled with just a button press. A second battery input is also provided to monitor voltage on a second battery. MFG# 84-2031-00, Cable not included.
Xantrex Truecharge 2 Remote Control 3rd gen SKU# 41050 The TRUECHARGE 2 Remote Panel is designed for use with TRUECHARGE 2 Battery Chargers. This full-function remote allows you to monitor and control battery charger performance from a remote location, including features not accessible from the charger’s onboard display. Remote control for TrueCharge 2 series only. Pushbutton control, LED indicators for status and faults. 4.6 x 3.6 x .7, flushmount. (Only for 2nd generation of TC2 chargers) MFG #: 808-8040-01
Xantrex TrueCharge2 10 Amp Battery Charger- Dual Bank 12V SKU# 33595 Xantrex TrueCharge2 Battery Chargers feature low electrical interference and superior, efficient, power factor corrected multistage charging. TrueCharge 2 Battery Chargers can be mounted virtually anywhere, given their unique drip-proof esign.certified ignition protection, even a gasoline engine room is an alternative for installation*. Trouble-free installation is ensured with easy-to-access AC &DC wiring compartments. MFG #: 804-1210
Xantrex TRUECharge2 10A Battery Charger - 24V SKU# 43733 24-volt charger. Microprocessor-controlled, multistage charging algorithms. Settings for two and three-stage charging. Settings for flooded, gel, AGM or lead-calcium batteries. Auto-ranging universal input voltage (90-265 Vac, 47-63 Hz) is also compatible with a generator or other low-quality power sources. Power factor corrected, temperature-compensated charging. Battery-equalization feature. Ability to charge batteries drained to extremely low voltage. MFG #: 804-2410
Xantrex TRUECHARGE™ 10 Battery Charger - 1 Bank SKU# 14058 Xantrex TrueCharge 10 Battery Charger, TRUECharge multistage battery chargers are microprocessor controlled for fast and accurate charging of all deep-cycle ‘house’ batteries. A wide AC input voltage range enables proper delivery of a full three-stage charge. MFG# 804-0100, 10 Amp, 12 VDC output, 120VAC 50/60HZ input, 1 Bank, 1 yr. warranty. Dimensions: 2.75H x 6.5W x 9.0D; Wt: 3 lbs. Supplied with battery leads and alligator clips. MFG #: 804-0100
Xantrex TRUECHARGE™2 20Amp Battery Charger - 3 Bank 12V SKU# 41051 Microprocessor-controlled, multistage charging algorithms. Settings for two and three-stage charging. Settings for flooded, gel, AGM or lead-calcium batteries. Auto-ranging universal input voltage (90-265 Vac, 47-63 Hz) is also compatible with a generator or other low-quality power sources. Temperature-compensated charging. Power factor corrected for efficient charging. Battery-equalization feature.
Ability to charge 'dead' batteries. MFG #: 804-1220-02
Xantrex TRUECHARGE™2 40Amp Battery Charger - 3 Bank 12V SKU# 41052 Microprocessor-controlled, multistage charging algorithms. Settings for two and three-stage charging. Settings for flooded, gel, AGM or lead-calcium batteries. Auto-ranging universal input voltage (90-265 Vac, 47-63 Hz) is also compatible with a generator or other low-quality power sources. Temperature-compensated charging. Power factor corrected for efficient charging. Battery-equalization feature. Ability to charge 'dead' batteries. MFG #: 804-1240-02
Xantrex Xanbus System Control Panel (SCP) f/Freedom SW2012/3012 SKU# 43645 Use the System Control Panel for quick and comprehensive control of the Freedom SW Inverter/Charger. The Xanbus System Control Panel (SCP) features a graphical, backlit LCD screen that displays system configuration and diagnostic information in one central location. Large keypad buttons, an intuitive onscreen menu system, and plain text status messages make it easy to configure and operate. Graphical 128x64 pixel LCD display. MFG #: 809-0921