ACR Firefly®2 Doublefly Rescue Combo Light, Strobe/Incandesent SKU# 38285 Firefly®2 Doublefly Rescue Combo Light, Strobe/Incandescent. The Doublefly's multi-function switch allows you to select between a high-intensity strobe visible from beyond 1 nm (1.9 km), or steady, incandescent light for close-up recovery work. The Xenon 360° beam flashes at one second intervals for at least 8 hours (2 hours continuous operation in incandescent mode). Multi-function switch selects between strobe light for visibility at great distances or steady incandescent light. MFG #: 3999.1
ACR Globalfix™ iPRO 406 MHz GPS EPIRB - Category 1 SKU# 34000 ACR-2846.0 GlobalFix iPro MFG# 2846 406 EPIRB, Integral GPS, External GPS, OLED Display, Cat I Class 2 (-20°C) Non-Haz (RLB-36) Replaces part# 2742. The all new GlobalFixTM iPRO Emergency Position Indicating Radio Beacon (EPIRB) is the next generation in marine safety electronics. The GlobalFixTM iPRO is a breakthrough product that boasts a digital display and dual GPS technology. MFG #: 2846
ACR Globalfix™ iPRO 406 MHz GPS EPIRB - Category 2 SKU# 34001 ACR GlobalFix iPro 406 EPIRB Cat II, MFG# 2848.0, Manual release, built-in GPS, LED status display. Built-in strobe, 121.5MHz homing beacon, 48 hours min broadcast time, 5 yr. non-hazmat lithium battery, self test. Mounting bracket included. GlobalFix™ iPRO offers the very latest in marine electronic life saving technology: Highly visible LED strobe Energy efficient. High efficiency electronics Performance you can count on. Non-hazardous batteries MFG #: 2848.0. M
ACR GlobalFix™ PRO 406 MHz GPS EPIRB Cat I SKU# 37000 ACR GlobalFix Pro 406 EPIRB Auto Rel. w/GPS with three levels of integrated signal technology GPS positioning, a powerful 406 MHz signal and 121.5 MHz homing capability. The GlobalFix™ PRO broadcasts a unique registered distress signal that not only tells rescuers where you are. The internal GPS will automatically turn on and acquire your position upon activation and then utilizes a powerful 406 MHz signal to relay your distress call. MFG #: 2842
ACR GlobalFix™ PRO 406 MHz GPS EPIRB Cat II SKU# 36999 ACR GlobalFix Pro 406 EPIRB Man Rel. w/GPS. Three levels of integrated signal technology GPS positioning, a powerful 406 MHz signal and 121.5 MHz homing capability the GlobalFix PRO quickly and accurately relays your position to a worldwide network of Search and Rescue satellites, reducing search time and increasing your chances of survival. MFG #: 2844 Status: Close Out Special, Limited Supply
ACR GPS Interface Cable f/2874 SAT 3 EPIRB SKU# 39121 ACR GPS Interface Cable for 2874 SAT 3 EPIRB. Optical GPS Interface Cable - Cat I. This connects the Satellite 3 406 to your vessel's GPS receiver to continuously update and store precise position data. GPS positioning provides SAR notification typically within 2-15 minutes. MFG #: 9388.1
ACR LowPro3 Bracket f/GlobalFix iPRO/PRO Cat II SKU# 34768 LowPro3 Bracket for GlobalFix iPRO/PRO Cat II. This low-profile bracket features an incredibly small footprint for bulkhead mounting. Made of high-density, UV-stabilized polyethylene, the LowPro will securely store your GlobalFix iPRO/PRO even after years of abuse. One-way moutning eliminates the possibiilty of installing EPRIB backwards. Integral de-activation magnet prevents the EPRIB from transmitting until deployed. MFG #: 9502
ACR QuickDraw Cat II EPIRB Bracket - Fits RLB-36/37/38/40 SKU# 45522 QuickDraw Cat II EPIRB Bracket - Category II Bracket for EPIRBs. This low-profile bracket features an incredibly small footprint for bulkhead mounting. Made of high-density, UV-stabilized polyethylene, the QuickDraw will securely store your ACR EPIRB and provides a quick release latch for fast access in an emergency. One-way mounting eliminates the possibility of installing EPIRB backwards. Integral de-activation magnet prevents the EPIRB from transmitting until deployed. MFG #: 9507
ACR ResQLink+™ 406 MHz GPS PLB Floats w/o Pouch SKU# 43461 CLOSE OUT SPECIAL! Small and mighty, the ACR ResQLink+ is a buoyant, GPS-enabled rescue beacon designed for anglers, pilots and back country sportsmen. ResQLink+ PLB-375, MFG# 2881, 406 MHz Miniature Personal Locator Beacon with built-in GPS, strobe, 121 MHz homing beacon, and optional 406Link message service. 30 hr. battery, 1.6W x 4.5H x 1.9D; Wt: 5.4 oz. Floats. MFG #: 2881 Status: Close Out Special, Limited Supply
ACR ResQLink™ 406 MHz GPS PLB SKU# 41339 ACR ResQLink PLB-375, Small, lightweight and powerful! The ResQlink 2880 PLB (personal locator beacon) GPS enabled rescue beacon is perfect for anglers, pilots and explorers worldwide. Quick and accurate is the best way to describe this PLB 375. With 3 levels of integrated signal technology your posi 406 MHz Miniature Personal Locator Beacon with built-in GPS, strobe, 121 MHz homing beacon,. 30 hr. battery, 1.9W x 3.9H x 1.3D; Wt: 4.6 oz MFG #: 2880
ACR SM-2 Automatic Crew-Overboard Marker Light w/Bulkhead Bracket SKU# 10688 ACR SM-2 Automatic Crew-Overboard Marker Light with Bulkhead Bracket. Brighter light in all directions. Upgraded polycarbonate blend case. Improved impact rating; UV, temperature and chemical resistant. Automatically rights itself and activates when in the water. Extremely durable; withstands vigorous use. Automatic COB marker light, Crew Overboard strobe, meets USCG/SOLAS-LSA, self righting, operates for up to 36 hrs. MFG #: 3940.1
ACR-1066 Lithium Battery Pack, Survival VHF ACR Lithium Survival Battery Pack, MFG# 1066, for GMDSS Survival Radio. Provides GMDSS capability to survival craft radio with 5 year replacement life (10 year useful life) and operating life of 8 hours continuous service. NOT rechargeable.
ACR-9388 GPS Interface cable for Man. EPIRBs *Non-Stock Item* ACR GPS Interface Cable for 2875 Sat 3 EPIRB
Optical GPS interface cable - Cat II. This connects the Satellite3 406 to your vessel's GPS receiver to continuously update and store precise position data. GPS positioning provides SAR notification typically within 2-15 minutes. Non-Stock Item
Clipper AIS Engine 3 SKU# 37355 Technical Data: Operating frequencies - 162.025 and 161.975 mHz. Supply voltage - 10 to 16 volts DC. Supply current - 43mA. All class A and B AIS Messages relayed. Antenna input - 50 ohm BNC. Data connector - 9 pin 'D' type. Mounting - via two moulded flanges. Dimensions - 115 x 100 x 30mm. Output format - NMEA 0183 (38400 Baud). VDM encapsulation string conforming to ITU-1371. NMEA RMC from GPS. Supplied with Software, fused power cable and data cable. MFG #: CL-AIS.
CMV-21410004 Mariner X2 Class B AIS Transceiver *Non-Stock Item* ComNav Mariner X2 Class B AIS Transceiver, MFG# 21410004, Monitors and broadcasts own and other vessel's position, course, speed and ID, and displays data on plotter or radar. NMEA 0183, NMEA 2000, and USB interfaces. Internal GPS receiver/antenna. Display graphically AIS target overlay on standard radars and multifunction chart displays
Wireless exchange - Navigation status between vessels and shore traffic monitoring centers
ComNav Voyager X3 Class A AIS Transceiver SKU# 48523 Compact single box design.NMEA 2000 standard for marine networking. Approval: FCC and USCG standard in USA, Wheel Mark/MED,IEC certified in Canada. Advanced technological design for enhanced performance & reliability. Display graphically AIS data target overlay on standard radars and multifunction chart displays. Wireless exchange - Navigation status between vessels and shore traffic monitoring centers. Monitor vessels of Class A and Class B. MFG #: 21410002
Digital Yacht AIS100 AIS Receiver SKU# 40832 For use with existing AIS compatible chart plotters, such as the latest Garmin, Raymarine, Navico, Standard Horizon and Furuno units. Connected to an existing VHF antenna (via a splitter) or to a dedicated AIS antenna, you can receive all AIS targets within 20 miles of your boat.
Low cost entry level AIS receiver. High performance dual-channel AIS receiver for use with existing plotter and radar systems. High Speed NMEA output (38,400 baud) MFG #: ZDIGAIS100
Requires VHF or AIS antenna.
Digital Yacht AIS100 Pro AIS Receiver SKU# 46740 The AIS100 Pro has a dual NMEA0183 and USB output capability, allowing you to supply AIS data to a PC (via USB) and a dedicated plotter (via NMEA) for larger installations.
Connect the NMEA (4800 baud) output of your GPS to the AIS100Pro and it will automatically multiplex (merge) the slower GPS data with the high speed AIS data and transmit everything on the high speed NMEA output (38,400 baud) - perfect for connection to a chart plotter with only one NMEA input. MFG #: ZDIGAIS100P
Digital Yacht AIS100 USB AIS Receiver SKU# 41420 For use with any AIS compatible PC navigation software, such as the latest SmarterTrack, MaxSea, Nobeltec, SeaPro and RosePoint applications. Connected to an existing VHF antenna (via a splitter) or to a dedicated AIS antenna, you can receive all AIS targets within 20 miles of your boat. Low cost entry level AIS receiver. High performance dual-channel AIS receiver for use with AIS compatible PC navigation software.
USB Interface for simple Plug & Play connection to a PC. MFG #: ZDIGAIS100USB
Digital Yacht AIS100P Pro AIS USB Receiver SKU# 43210 AIS100P Pro AIS USB Receiver
Value priced, high performance, dual channel black box AIS receiver with USB output. Now includes NMEA0183 input multiplex function - combines NMEA 4800 baud data with Ais data and makes all data available on the USB output. Supplied with Windows, Mac, and Linux driver disk. Requires connection to 12/24v supply and connection to suitable VHF antenna or splitter. MFG #: ZDIGAIS100P
Digital Yacht AISnet AIS Base Station SKU# 40833 AISnet is a new AIS receiver for use as an AIS base station at home or in the office. Utilising the same high performance dual channel AIS receiver as the rest of the Digital Yacht range, AISnet also features an ethernet socket so that you can connect it to your broadband router and send AIS data to an on-line AIS tracking service. Integrated ethernet network controller for supplying AIS data to online AIS websites. High performance dual channel AIS receiver. MFG #: ZDIGAISNET
Digital Yacht AIT2000 Class B Transponder w/GPS Antenna Includes Programming Fee SKU# 42645 Latest generation AIS technology - featuring a brand new AIS transponder (Class B) design. Ideal for use with existing plotter and radar systems. Built-in high performance 50 channel GPS receiver (ideal also as a backup GPS). USB Interface for simple plug and play connection to a PC or Mac. Includes N2Net interface and cable for connection to NMEA 2000. nettwork. High speed NMEA output (38,400 baud) - compatible with industry std plotters. Comes complete with GPS antenna. MFG #: ZDIGAIT2000
Digital Yacht iAIS f/iPhone & iPad SKU# 41591 World's first wireless AIS and NMEA Data server.; Tri-output; Wi-Fi, NMEA 0183 and USB. Multiplexed NMEA input for wireless NMEA data feed of boat's instrument and GPS data. Free iAIS App for iPhone, iTouch or iPad. Integrated 802.11b+g wireless access point. Fully compatible with popular iNavX navigation application for Apple mobile devices . Rugged IPX5 aluminium housing. Requires VHF antenna or dedicated AIS antenna (available as optional accessory) or splitter. MFG #: ZDIGIAIS
Digital Yacht PilotLINK AIS Interface Class A SKU# 50960 Wireless Interface for Class A AIS Transponders. Reads GPS and AIS data directly from the transponders Pilot Plug. Supports Bi-Directional communication for configuring the transponder. Uses standard NMEA data for maximum compatibility with software applications. Free iAIS App for iPhone, iTouch or iPad. Complimentary copy of SmarterTrack Lite for PCs. Creates a wireless access point with a typical range of 30m. Transmits data via TCP/UDP link. MFG #: ZDIGPLINK
Digital Yacht S1000 AIS Smart SART SKU# 50961 Full IMO Compliant, Wheel Marked AIS SART. 50 channel GPS receiver built in. Specialist VHF antenna technology for superior performance. LED indications for test and activation. When activated transmits position 8 times per minute. 96 hour battery life. Sends SART ACTIVE safety message every 4 minutes. Easy to change, low cost battery replacement.