YachtsOfStuff.com Connects Boaters
logon to YachtsOfStuff.com  Log In  |  register on YachtsOfStuff.com New Visitor
Search YachtsOfStuff.com Quick Search
YachtsOfStuff.com Connects Boaters
  October 24, 2014
  Sales & Specials
October Specials
Wind Generator
Wind Generator
Pro-Tect Spray On Robber Coating
Pro-Tect Barrier Coating
Close Out Specials
$ALE, While Supplies Last!
 
 Contact us to be a supplier for the Generators category. 
Generators: Marine Generator, Wind Generator, Mount Accesories Generators: Marine Generator, Wind Generator, Mount Accesories Back
Search within Category: 
Needed  (0)
YOS Shop  (50)
   Page   Next Page
ImageItem/DescriptionPriceOrder On-Line
Air Breeze Marine 12 Volt DC Wind Generator, 200 Watt -WGB20212 Air Breeze Marine 12 Volt DC Wind Generator, 200 Watt -WGB20212
The Air Breeze is quieter, more efficient and precision engineered to deliver more energy at lower wind speeds. The Air Breeze is for battery charging applications, such as back up power, remote monitoring systems, sailboats and remote homes. 3 year warranty, Durable Composite blades, Microprocessor based smart internal regulator, Aircraft quality aluminum alloy castings, Brushless neodymium alternator, Maintenance Free - Only two moving parts, Compatible with all Air X towers and accessories.
$1,248.75
picture not available

Bench-Diagnostic Test - Wind Generators
na
$55.00
ELE51050A Wind Generator Control Panel ELE51050A Wind Generator Control Panel
e-10 Wind Generator Control Panel. 12V-25A. The flush Mount panel includes a pre-wired ”Stop Switch”, Digital PEM Meter, and Circuit Breaker
$337.50
MKW01100A Wind Generator 9' Mast & Mounting Kit Coated MKW01100A Wind Generator 9' Mast & Mounting Kit Coated
MKW01100A Wind Generator 9' Mast & Mounting Kit - (Coated) All the hardware to install your own wind generator mast and stays. Includes the 1.5” diameter mast (9' long) and two 1” diameter SS stay pipes (8' long which will need to be cut based on installation needs). Also included is a hinged isolated mast base, (2) isolated 1” stay tie mounts and hardware. Internally coated with a special absorbing material to reduce vibration.
$498.75
MKW01101A Wind Generator  (Un-Coated) 9'  Mast & Mounting Kit 914i MKW01101A Wind Generator (Un-Coated) 9' Mast & Mounting Kit 914i
MKW01101A (Un-Coated) Wind Generator 9' Mast & Mounting Kit - All the hardware to install your own wind generator mast and stays. Includes the 1.5” diameter mast (9' long) and two 1” diameter SS stay pipes (8' long which will need to be cut based on installation needs). Also included is a hinged isolated mast base, (2) isolated 1” stay tie mounts and hardware. Internally coated with a special absorbing material to reduce vibration.
$473.75
MKW01105 Mast Hardware Mounting Kit MKW01105 Mast Hardware Mounting Kit
All the hardware to install your own wind turbine mast and stays. You must supply the 1.5” ID (schedule 40 pipe) mast and two 1” stay SS pipes (recommend 8' long). Included in this great kit is only the hinged isolated mast base, two isolated stay tie mounts and related hardware to install the mast. Red arrows indicated what is included in this kit. This kit is recommended for use with the Air Breeze, Air X, Airdolphine, Rutland 913/914i wind turbines.
$283.75
MKW20504 Rutland 504 Mounting Kit - Marlec MKW20504 Rutland 504 Mounting Kit - Marlec
MKW20504 Rutland 504 Mounting Kit - Rutland Marine Mounting kits offer easy installation of the Rutland 504 windcharger on any sailing boat. The kits are supplied pre-drilled for mounting of the windcharger and include all fasteners for assembling the pole and attaching guys or stays (user supplied). Polished stainless steel, Overall height: 6.56 feet; Packed weight: 6.5lbs; Outside diameter: 1.5 inch; Fittings include: Deck plates, guy brackets, tube joiner, screws, allen key, etc.
$193.75
picture not available

MKW20950 Stay Kit - Rutland 504 & 913 - Marlec
MKW20950 Stay Kit - 504 & 913 - Marlec
$209.56
picture not available

MKW80045A SPRECO Silentwind Wind Generator 12 Volt Turbine w/Uncoated Mast Kit
MKW80045A Turnbine with uncoated mast kit. Silentwind 12v Marine Wind Generator Uncoated Mast Kit (includes Mast Hardware Mounting Kit Mast Pole Kit (9' foot brushed anodized aluminum mast and two 8 foot stays) 10-3 Wire, 10-2 Wire Cable Clam, Crimp Rings,TY Wraps 92lbs
$2,100.00
picture not available

MKW80050A SPRECO Silentwind Wind Generator 12 Volt Turbine w/Coated Mast Kit
Silentwind 12v Marine Wind Generator Coated Mast Kit (includes Mast Hardware Mounting Kit Mast Pole Kit (9' foot brushed anodized aluminum mast and two 8 foot stays) 10-3 Wire 10-2 Wire Cable Clam Crimp Rings TY Wraps
$2,383.00
MKW90050A Sunforce 600 Tubine and Tower Value Kit (Coated) MKW90050A Sunforce 600 Tubine and Tower Value Kit (Coated)
Turbine and Tower Kit (Coated) includes: Sunforce 600 Turbine and external MPPT Controller (12 Volt*) Coated Mast Kit (includes Mast Hardware Mounting Kit Mast Pole Kit (9' foot brushed anodized aluminum mast and two 8 foot stays)
$1,220.00
MKW90150A Sunforce 600 Turbine and Tower Value Kit (Uncoated) MKW90150A Sunforce 600 Turbine and Tower Value Kit (Uncoated)
Sunforce 600 Turbine and externall MPPT (Maximum Power Point Tracking) Contoller(12Volt). Uncoated Mast Kit(includes Mast Harware Mounting Kit, Mast Pole Kit (9' foot brshed anodezed aluminum mast and two 8 foot stays)
$1,175.00
picture not available

Repair Labor on Wind Generators
Per hour.
$75.00
WG8 - 1.75 OD Wind Generator Mount WG8 - 1.75 OD Wind Generator Mount
WG8 wind Generator Mount 1.75 inch OD stainless steel pole, includes base mount and rail mount
$595.00
WG8 - 2.00 OD Wind Generator Mount WG8 - 2.00 OD Wind Generator Mount
WG8 wind Generator Mount 2.00 inch OD stainless steel pole, includes base mount and rail mount
$695.00
WG8 - Bracing strut for OMS Wind Generator Mounts WG8 - Bracing strut for OMS Wind Generator Mounts
WG8 Bracing Strut includes rail clamp, tower clamp and adjustable length strut
$175.00
WGF20050 Sunforce 600 MARINE Turbine w / MPPT WGF20050 Sunforce 600 MARINE Turbine w / MPPT
The Sunforce 600 Marine Wind Turbine is designed for watercrafts and any area in close proximity to salt water. The heavy-duty powder-coating adds enhanced resistance to the effects of the sun, wind, and water. All components have been tested to perform, without degradation under marine conditions. Each unit includes a remotely mounted MPPT controller that optimizes the wind generator performance for maximum power production.
$913.75
WGF20056 Sunforce 44444 400 W 12V  Wind Turbine WGF20056 Sunforce 44444 400 W 12V Wind Turbine
Low Cost Marine grade Sunforce 44444 Wind Turbine 400 W - 12 V A light weight portable and quiet wind generator ideal for charging your batteries. Only 19 lb!!! Use Wind to Generate Power & Run your Appliances & Electronics. An average monthly output of 38 KWh given an average 12 mph wind speed. As your wind speeds increase so does the energy output. The start up wind speed is 8 mph, (3.58 m/s). Great for Cottages, 12V Battery Charging, Remote Power, Back Up Power & Hobbyists.
$700.00
WGR10504 Rutland 504 Windcharger WGR10504 Rutland 504 Windcharger
WGR10504 Rutland 504 Windcharger, completely unique mini windcharger designed with the weekend yachtsman in mind. The Rutland 503 is ideal for trickle charging batteries on board vessels less that 10m in length with battery banks of up to 100Ah.
$618.75
WGR10914 Rutland 914i Windcharger 12v WGR10914 Rutland 914i Windcharger 12v
Marlec is proud to announce their latest innovation in micro wind turbines the 914i Windcharger which intelligently uses Maximum Power Point Tracking (MPPT) technology to optimise the generator operation to perfectly match the speed of the turbine thereby achieving a highly efficient and reliable power output. Warranty 24 months 40lbs
$1,081.25
WGR20914 Rutland 914i Windcharger 24V WGR20914 Rutland 914i Windcharger 24V
Marlec is proud to announce their latest innovation in micro wind turbines the 914i Windcharger which intelligently uses Maximum Power Point Tracking (MPPT) technology to optimise the generator operation to perfectly match the speed of the turbine thereby achieving a highly efficient and reliable power output. Warranty 24 months 40lbs
$1,093.75
WGR39103 Rutland 910-3 - 12V *Special Order* WGR39103 Rutland 910-3 - 12V *Special Order*
WGR39103 Rutland 910-3 - 12V; The FM910-3 Furlmatic Windcharger is a powerful and extremely robust wind generator with a proven track record of reliability since the mid 1980's when the first model was launched. Of course, we've updated and improved the FM910-3 over the years to deliver better performance and value
$1,293.00
WGR49103 Rutland 910-3 - 24V *Special Order* WGR49103 Rutland 910-3 - 24V *Special Order*
WGR49103 Rutland 910-3 - 24V; The FM910-3 Furlmatic Windcharger is a powerful and extremely robust wind generator with a proven track record of reliability since the mid 1980's when the first model was launched. Of course, we've updated and improved the FM910-3 over the years to deliver better performance and value.
$1,329.75
WGR50504 12 Volt HRS503 Controller * Special Order* WGR50504 12 Volt HRS503 Controller * Special Order*
WGR50504 12 Volt HRS503 Controller, Wind Generator Regulator
$113.00
WGR50600 HRSi Controller 12/24V WGR50600 HRSi Controller 12/24V
WGR50600 HRSi Controller 12/24V - incorporates the latest Pulse Width Modulation (PWM) technology to regulate charge of the battery. Combined wind charger and up to 160 watts of solar panel input for single battery bank charging. Two tri-color LED's indicate charge status and battery voltage. includes a Stop/Run switch. Works on 12 or 24 V systems and can be used with Rutland 503 or 913 wind generators.
$143.75
WGR50650 HRDi Controller 12/24V WGR50650 HRDi Controller 12/24V
WGR50650 HRDi Controller 12/24V - The latest wind & solar charge controller development from Marlec, the HRDi evolves from and improves on the successful HRDX controller. The controller incorporates Pulse Width Modulation (PWM) technology to regulate battery voltage preventing overcharge. Charge control and dual battery bank charging for use with Rutland 503, 504, 913 or FM910-3 Wind chargers and up to 160W of solar panels. Comparable to the discontinued HRDX controller.
$300.00
picture not available

WGR70504 Rutland 504 Blade
WGR70504 Rutland 504 Replacment Blade
$75.32
picture not available

WGR70520 Rutland 504 Nose Cone
WGR70520 Rutland 504 Nose Cone
$33.99
picture not available

WGR70530 Pair of Bearings - Rutland 504
WGR70530 Pair of Bearings - Rutland 504
$48.00
picture not available

WGR70530 Pair of Bearings - Rutland 504
WGR70530 Pair of Bearings - Rutland 504
$48.00
WGR70913 Rutland 913 & 914i Blades WGR70913 Rutland 913 & 914i Blades
Rutland 913 & 914i Replacement Blades, each
$29.99
Page 1 of 2
Page: 1  [2
  Log In or Register to Post, Sell, Purchase, Contact, Inquire and Select Items.
YOS Shop YOS Shop items are brand new, unless otherwise indicated.
 Post an Item You Are Looking For, "Needed", Free.
 Post an Item You Want to Sell, "For Sale".  Purchase "For Sale" posting credits.
 Posting Help.
 Contact and Sell to a "Needed" poster using a "For Sale" posting credit.
 Purchase "For Sale" Posting credits.
 Not sure if you have what the poster wants? Contact Us to relay your questions to a Poster before using a posting credit. Please include "Posted By" Name and "Post Name".
 
Home  |  Browse  |  Search  |  Help  |  Advertise  |  Contact Us YachtsOfStuff.com Boating Supply
Terms & Conditions
Legal Notices
Privacy Policy
Report Problems
© 2002-2014; S2ware, LLC; All rights reserved.