YachtsOfStuff.com Connects Boaters
logon to YachtsOfStuff.com  Log In  |  register on YachtsOfStuff.com New Visitor
Search YachtsOfStuff.com Quick Search
YachtsOfStuff.com Connects Boaters
  November 17, 2017
  Sales & Specials
November Specials
Close Out Specials
$ALE, While Supplies Last!
 
 Contact us to be a supplier for the Trailer Parts category. 
Trailer Parts: Trailer Parts, jacks, hiches, couplers, rollers Trailer Parts: Trailer Parts, jacks, hiches, couplers, rollers Back
Search within Category: 
Needed  (0)
YOS Shop  (69)
   Page   Next Page
ImageItem/DescriptionPriceOrder On-Line
BoatBuckle G2 Retractable Bow Tie-Down - 14-43” SKU# 35896 BoatBuckle G2 Retractable Bow Tie-Down - 14-43” SKU# 35896
BoatBuckle® G2 Retractable Bow Tie-Down. Quantity: 1. Dimensions: 14-43”. Break Strength: 2,500 lbs. Safe Work Load: 833 lbs. Introducing another industry first... the BoatBuckle® G2 Bow Tie-Down, the only automatically retractable ratcheting tie-down in its category! This system was designed with three-point trailer tie-down safety in mind and should always be used in conjunction with a good winch strap, along with a transom or gunwale tie-down.
$52.32
BoatBuckle G2 Retractable Gunwale Tie-Down - 14-38” - Pair SKU#35898 BoatBuckle G2 Retractable Gunwale Tie-Down - 14-38” - Pair SKU#35898
BoatBuckle® G2 Retractable Gunwale Tie-Down. Quantity: 2. Dimensions: 14-38”. Break Strength: 2,500 lbs./ea. Safe Work Load: 833 lbs. The only one in its class, the BoatBuckle® G2 Gunwale Tie-Down offers the same superior quality as a BoatBuckle® G2 Transom Tie-Down, yet boasts a beefy vinyl-coated double J-hook, designed to fit gunwale rails that measure 2” wide or less. Perfect for aluminum or other narrow gunwale boats.
$101.72
BoatBuckle G2 Retractable Transom Tie-Down - 14-43” - Pair - Stainless Steel SKU# 35895 BoatBuckle G2 Retractable Transom Tie-Down - 14-43” - Pair - Stainless Steel SKU# 35895
Quantity: 2. Dimensions: 14-43”. Break Strength: 1,500 lbs./ea. Safe Work Load: 500 lbs. Sleek, contoured styling. Permanently mounts to trailer. Stronger - 1,500 lb break strength. Simple, one-hand operation. Adapts to virtually any mounting angle. Stainless steel power spring. MFG #: F14256
$120.38
BoatBuckle G2 Retractable Transom Tie-Down - 14-43” - Pair SKU#35894 BoatBuckle G2 Retractable Transom Tie-Down - 14-43” - Pair SKU#35894
BoatBuckle® G2 Retractable Transom Tie-Down.Quantity: 2. Dimensions: 14-43”. Break Strength: 2,500 lbs./ea. Safe Work Load: 833 lbs. BoatBuckle® G2 is still the ultimate tie-down system in convenience, style and innovation in trailer boat rigging! As with all of our products, we trust the G2 will actually exceed all of your expectations.. Sleek, contoured styling.Permanently mounts to trailer. Stronger-1,500 lb break strength. Simple, 1-hand operation. MFG #: F08893
$73.35
C.E. Smith 1-1/2” Wide Keel Base Roller Assembly f/2” - 2-1/2” Tongue SKU# 53834 C.E. Smith 1-1/2” Wide Keel Base Roller Assembly f/2” - 2-1/2” Tongue SKU# 53834
Roller length: 4”. Shaft diameter: 5/8”. Diameter of mounting holes (each): 7/16”. Spacing of mounting holes: 3” apart on center. Eases loading and unloading of boat. Helps to absorb road shock while boat is being trailered. Bracket lets you bolt roller assembly onto the tongue or frame of your boat trailer. Requires 7/16” fasteners (not included. Sturdy, 1/8” galvanized steel bracket resists corrosion. Black rubber roller delivers long-lasting performance. Made in USA. MFG #: 32100G
$29.33
C.E. Smith 2” Stationary Keel Roller Assembly f/2” Tongue SKU# 53835 C.E. Smith 2” Stationary Keel Roller Assembly f/2” Tongue SKU# 53835
Stationary keel roller bracket assembly for a 2” wide tongue. Bracket: 1/8” thick Galvanized. 5/8” shaft. 1/2” hole. 2-1/2” hole centers. Replacement part #32111G. Roller: 3” diameter. 3-7/8” wide. 5/8” shaft. Replacement part #29524. Use with U-bolt part #15284GA. MFG #: 32110G
$28.98
C.E. Smith 2’ Short Bunk Guide-On (pair) SKU# 39420 C.E. Smith 2’ Short Bunk Guide-On (pair) SKU# 39420
Carpeted bunkboards provide proper center loading even in wind or side current conditions. 2'' x 4'' X 24” boards tilt to hug the hull and are covered with high grade marine carpet. Height of 21'' with adjustment out to 13” from frame on each side. Can be mounted on top of frame for extra height. Complete with mounting hardware to fit frames up to 3'' wide x 4-1/4'' high. MFG #: 27660
$94.39
C.E. Smith 3” Bow Bell Roller Assembly - Black TPR SKU# 49862 C.E. Smith 3” Bow Bell Roller Assembly - Black TPR SKU# 49862
Durable thermal plasticized rubber (TPR) bow bell assemblies help to center the boat and prevent bow to bowstand contact. Black TPR. 4-1/2” diameter. 6” Wide. 1/2” shaft. Fits 3” wide center roller bracket. MFG #: 29332
$24.95
C.E. Smith 3” Bow Bell Roller Assembly - Blue TPR SKU# 49860 C.E. Smith 3” Bow Bell Roller Assembly - Blue TPR SKU# 49860
Durable thermal plasticized rubber (TPR) bow bell assemblies help to center the boat and prevent bow to bowstand contact. Blue TPR. 4-1/2” diameter. 6” Wide. 1/2” shaft. Fits 3” wide center roller bracket. MFG #: 29330
$24.95
C.E. Smith 3” Bow Bell Roller Assembly - Yellow TPR SKU# 49859 C.E. Smith 3” Bow Bell Roller Assembly - Yellow TPR SKU# 49859
Durable thermal plasticized rubber (TPR) bow bell assemblies help to center the boat and prevent bow to bowstand contact. Yellow TPR. 4-1/2” diameter. 6” Wide. 1/2” shaft. Fits 3” wide center roller bracket. MFG #: 29300
$24.95
C.E. Smith 3” Stationary Keel Roller Assembly f/3” Tongue SKU#53836 C.E. Smith 3” Stationary Keel Roller Assembly f/3” Tongue SKU#53836
Stationary keel roller bracket assembly for a 3” wide tongue. Bracket: 1/8” thick Galvanized. 5/8” shaft. 1/2” hole slots. 3” hole centers. Replacement part #32151G. Roller: Black natural rubber. 3” Diameter. 4-7/8” wide. 5/8” shaft. Replacement part #29522. MFG #: 32150G
$28.73
C.E. Smith 4” Adjustable Keel Roller Assembly f/2” Tongue - Black SKU# 53839 C.E. Smith 4” Adjustable Keel Roller Assembly f/2” Tongue - Black SKU# 53839
Adjustable keel roller bracket assemblies are perfect for adding keel support forward along the tongue. Fits 2” tongue width. 4” black rubber roller. Includes pair of 3/8” bolts. MFG #: 32005G
$36.40
C.E. Smith 4” Adjustable Keel Roller Assembly f/2” Tongue - Yellow SKU# 53840 C.E. Smith 4” Adjustable Keel Roller Assembly f/2” Tongue - Yellow SKU# 53840
Adjustable keel roller bracket assemblies are perfect for adding keel support forward along the tongue. Fits 2” tongue width. 4” yellow thermal plastic rubber roller. Includes pair of 3/8” bolts. MFG #: 32015G
$40.98
C.E. Smith 4” Bow Bell Roller Assembly - Black TPR SKU# 49863 C.E. Smith 4” Bow Bell Roller Assembly - Black TPR SKU# 49863
Durable thermal plasticized rubber (TPR) bow bell assemblies help to center the boat and prevent bow to bowstand contact. Black TPR. 5-1/2” diameter. 8” Wide. 1/2” shaft. Fits 4” wide center roller bracket. MFG #: 29333
$30.58
C.E. Smith 4” Bow Bell Roller Assembly - Blue TPR SKU# 49861 C.E. Smith 4” Bow Bell Roller Assembly - Blue TPR SKU# 49861
Durable thermal plasticized rubber (TPR) bow bell assemblies help to center the boat and prevent bow to bowstand contact. Blue TPR. 5-1/2” diameter. 8” Wide. 1/2” shaft. Fits 4” wide center roller bracket. MFG #: 29331
$30.58
C.E. Smith 4” Bow Bell Roller Assembly - Yellow TPR SKU# 53833 C.E. Smith 4” Bow Bell Roller Assembly - Yellow TPR SKU# 53833
Durable Thermal Plasticized Rubber (TPR) bow bell assemblies help to center the boat and prevent bow to bowstand contact. Yellow TPR. 5-1/2” Diameter. 8” wide. 1/2” shaft. Fits 4” wide center roller bracket. MFG #: 29301
$30.58
C.E. Smith 4’ Roller Bunks, pair. SKU# 49856 C.E. Smith 4’ Roller Bunks, pair. SKU# 49856
Roller bunks make loading and unloading small craft at very short or even dry rams easy. Pre-assembled and pre-drilled for easy installation. Maybe be installed using mounting brackets if lift and/or angle is needed, or may be bolted directly to trailer frame for a flat bottom boat, or on top of existing bunk boards. Durable 2” polypropylene rollers on 1/2” shafts mounted in a heavy gauge pre-galvanized channel. Supports up to 1500lbs of well distributed weight. Mounting hardware not included.
$137.01
C.E. Smith 40” L.E.D. Post Boat Guide-On SKU# 35421 C.E. Smith 40” L.E.D. Post Boat Guide-On SKU# 35421
Long lasting, waterproof and shockproof, one piece red and amber LED lamps. The LED lamps make it easy to see your trailer's position when backing down the ramp and dramatically increase your trailer's visibility over the road at night. Amber light faces front, red faces rear. For trailer frames up to 3”W x 4 1/4”H. Sold in pairs. 40” Total Height. Adjusts Out to 13” each Side. Fits Frames up to 3”W x 4-1/4”H. 1-1/2” sq. 16 ga Pre-Galvanized Steel post. Extends 18” Into 2” PVC tube. MFG#: 27740
$97.07
C.E. Smith 40” PVC Post Guide-On SKU# 39410 C.E. Smith 40” PVC Post Guide-On SKU# 39410
Adjusts Out to 13” each Side. Fits Frames up to 3”W x 4-1/4”H. 1-1/2” sq. 16 ga Pre-Galvanized Steel post Extends 18” Into 2” PVC tube for strength. MFG #: 27620
$71.78
C.E. Smith 5” Adjustable Keel Roller Assembly f/3” Tongue - Black SKU# 53837 C.E. Smith 5” Adjustable Keel Roller Assembly f/3” Tongue - Black SKU# 53837
Adjustable keel roller bracket assemblies are perfect for adding keel support forward along the tongue. Fits 3” tongue width. 5” black rubber roller. Includes pair of 3/8” bolts. MFG #: 32003G
$33.27
C.E. Smith 5” Adjustable Keel Roller Assembly f/3” Tongue - Yellow SKU# 53838 C.E. Smith 5” Adjustable Keel Roller Assembly f/3” Tongue - Yellow SKU# 53838
Adjustable keel roller bracket assemblies are perfect for adding keel support forward along the tongue. Fits 3” tongue width. 5” yellow thermal plastic rubber roller. Includes pair of 3/8” bolts. MFG #: 32013G
$43.23
C.E. Smith 5’ Bunk Board Guide-On SKU# 53832 C.E. Smith 5’ Bunk Board Guide-On SKU# 53832
CLOSE OUT SPECIAL!
Carpeted bunkboards provide proper center loading even in wind or side current conditions. 1-1/2” square pre-galvanized uprights, angled out at 75°. 2” x 4” x 60” boards tilt to hug the hull and are covered with high grade marine carpet. Boards are untreated Southern yellow pine. Height of 21” with adjustment out to 13” from frame on each side. Can be mounted on top of frame for extra height. Complete with mounting hardware to fit frames up to 3” wide x 4-1/4” high
Status: Close Out Special, Limited Supply
$144.22
C.E. Smith 5’ Roller Bunks SKU#49857 C.E. Smith 5’ Roller Bunks SKU#49857
Roller bunks make loading and unloading small craft at very short or even dry ramps easy. Pre-assembled and pre-drilled for easy installation. May be installed using mounting brackets if lift and/or angle is needed, or may be bolted directly to trailer frame for a flat bottom boat, or even mounted on top of existing bunk boards. Durable 2” polypropylene rollers on 1/2” shafts mounted in a heavy gauge pre-galvanized channel. Supports up to 1500lbs of well distributed weight. Sold in pairs.
$153.37
C.E. Smith 60” L.E.D. Post Boat Guide-On SKU# 44742 C.E. Smith 60” L.E.D. Post Boat Guide-On SKU# 44742
Long lasting, waterproof and shockproof, one piece red and amber LED lamps. LED lamps make it easy to see your trailer's position when backing down the ramp and dramatically increase your trailer's visibility on the road at night. Amber light faces front, red faces rear. Mounting hardware and wiring included. Sold in pairs. 60” Total Height. Adjusts Out to 19” each Side. Fits Frames up to 3”W x 4-¼”H. 1-½” sq. 16 ga Pre-Galvanized Steel post. MFG #: 27760
$117.47
C.E. Smith 60” Post Guide-On w/I-Beam Mounting Kit SKU# 53830 C.E. Smith 60” Post Guide-On w/I-Beam Mounting Kit SKU# 53830
Post Guide-Ons allow you to see the location of your trailer under water. Designed for I-beam trailers and I-beam boat lifts, these guide-ons feature two-piece mounting clamp that works above or below the I-beam. Brackets will fit onto any height and virtually any width I-beam trailer frame. Mounting hardware included. Sold in pairs. Adjusts out to 19” each side. 1-1/2” square. 16 gauge pre-galvanized steel uprights. 2-3/8” diameter white PVC post. MFG #: 27648
Status: Close Out Special, Limited Supply
$99.82
C.E. Smith 75” Guide f/I-Beam Mounting SKU# 49864 C.E. Smith 75” Guide f/I-Beam Mounting SKU# 49864
Extra tall Post Guide-Ons allow you to see the location of your trailer under water. Designed for I-beam trailers and I-beam boat lifts, two-piece mounting clamp that works above or below the I-beam. Fits I-beams up to 4” wide with provided hardware. Mounting hardware included. Sold in pairs. Adjusts out to 19” on each side. Fits frames up to 3”W x 5-1/4” H. 1-1/2” square, 16 gauge pre-galvanized steel uprights, 36” high. 2-3/8” diam. white PVC posts. MFG #: 27635
$134.72
C.E. Smith 75” Post Guide-On w/Unlighted Posts f/U-Bolt Mounting SKU# 53831 C.E. Smith 75” Post Guide-On w/Unlighted Posts f/U-Bolt Mounting SKU# 53831
Post Guide-Ons allow you to see the location of your trailer when it's under water. The 2” PVC tubes make it easy to see your trailer's position when backing down the ramp. Mounting hardware included. Sold in pairs. Adjusts out to 19” each side. Fits frames up to 3” W x 5-1/4” H. 1-1/2” square, 16 gauge pre-galvanized steel uprights. 2-3/8” diameter white PVC posts. MFG #: 27636
$138.36
C.E. Smith Panel Bracket Assembly 10” Spool Roller - Black SKU# 45462 C.E. Smith Panel Bracket Assembly 10” Spool Roller - Black SKU# 45462
Pre-assembled for easy installation! Strong hot-dipped galvanized bracket with black rubber roller for proper keel support. Mounting slots are 8” on center. MFG #: 10404G
$50.47
C.E. Smith Panel Bracket Assembly 12” Keel Roller - Yellow TPR SKU# 45466 C.E. Smith Panel Bracket Assembly 12” Keel Roller - Yellow TPR SKU# 45466
Pre-assembled for easy installation! Strong hot-dipped galvanized bracket with yellow rubber roller for proper keel support. Mounting slots are 10” on center. MFG #: 10455G
$65.11
C.E. Smith Panel Bracket Assembly 12” Spool Roller - Black SKU# 45463 C.E. Smith Panel Bracket Assembly 12” Spool Roller - Black SKU# 45463
Pre-assembled for easy installation! Strong hot-dipped galvanized bracket with black rubber roller for proper keel support. Mounting slots are 10” on center. MFG #: 10405G
$57.75
C.E. Smith Panel Bracket Assembly 4” Spool Roller - Black SKU# 45459 C.E. Smith Panel Bracket Assembly 4” Spool Roller - Black SKU# 45459
Pre-assembled for easy installation! Strong hot-dipped galvanized bracket with 4” black rubber spool roller for proper keel support. Mounting slots are on 2” centers. MFG #: 10400G
$29.52
Page 1 of 3
Page: 1  [2]  [3
  Log In or Register to Post, Sell, Purchase, Contact, Inquire and Select Items.
YOS Shop YOS Shop items are brand new, unless otherwise indicated.
 Post an Item You Are Looking For, "Needed", Free.
 Post an Item You Want to Sell, "For Sale".  Purchase "For Sale" posting credits.
 Posting Help.
 Contact and Sell to a "Needed" poster using a "For Sale" posting credit.
 Purchase "For Sale" Posting credits.
 Not sure if you have what the poster wants? Contact Us to relay your questions to a Poster before using a posting credit. Please include "Posted By" Name and "Post Name".
 
Home  |  Browse  |  Search  |  Help  |  Advertise  |  Contact Us YachtsOfStuff.com Boating Supply
Terms & Conditions
Legal Notices
Privacy Policy
Report Problems
© 2002-2017; S2ware, LLC; All rights reserved.