YachtsOfStuff.com Connects Boaters
logon to YachtsOfStuff.com  Log In  |  register on YachtsOfStuff.com New Visitor
Search YachtsOfStuff.com Quick Search
YachtsOfStuff.com Connects Boaters
  November 19, 2017
  Sales & Specials
November Specials
Lowrance Fishfinder/Chart Plotter
Fishfinder/Chart Plotter
Close Out Specials
$ALE, While Supplies Last!
 
 Contact us to be a supplier for the Transducers category. 
Transducers: Transducers Transducers: Transducers Back
Search within Category: 
Needed  (0)
YOS Shop  (231)
   Page   Next Page
ImageItem/DescriptionPriceOrder On-Line
Airmar 117WR-1 Crows Foot Transducer Wrench SKU# 57145 Airmar 117WR-1 Crows Foot Transducer Wrench SKU# 57145
Transducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut. Wrenches are constructed of 3/16” thick mild steel. They can easily be bent or modified to accommodate challenging installation locations. For use with: B117, B150, B744V, B744VL, B765C, SS555
$39.99
Airmar 117WR-2 Transducer Hull Nut Wrench SKU# 57080 Airmar 117WR-2 Transducer Hull Nut Wrench SKU# 57080
A single-handed wrench to tighten the hull nut on 2” bronze and stainless steel housings. You can use wrench 117WR-4 to brace the housing when using this wrench. For use with: B117, B150, B744V, B744VL, B765C, SS555
$43.56
Airmar 117WR-3 Double Handle Transducer Wrench SKU# 57149 Airmar 117WR-3 Double Handle Transducer Wrench SKU# 57149
Transducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut. Wrenches are constructed of 3/16” thick mild steel. They can easily be bent or modified to accommodate challenging installation locations. For use with: B117, B150, B744V, B744VL, B765C, SS555
$63.92
Airmar 117WR-4 Transducer Housing Wrench SKU# 57084 Airmar 117WR-4 Transducer Housing Wrench SKU# 57084
A single-handed wrench that holds the main thru-hull housing via the 'wrench flats' on the side of the housing to facilitate tightening of the hull nut. For 2” bronze and stainless steel housings (P617V, B617V, SS617V). Use wrench 117WR-2 or 117WR-3 for the hull nut. *Note that this wrench will not fit on the CA500 camera housing.
$41.02
Airmar 164WR-1 Crows Foot Transducer Wrench SKU# 57148 Airmar 164WR-1 Crows Foot Transducer Wrench SKU# 57148
Transducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut. Wrenches are constructed of 3/16” thick mild steel. They can easily be bent or modified to accommodate challenging installation locations. For use with: B164, SS164, B175C, SS164
$48.84
Airmar 164WR-2 Transducer Hull Nut Wrench SKU# 57083 Airmar 164WR-2 Transducer Hull Nut Wrench SKU# 57083
A single-handed wrench to tighten the hull nut on B164, SS164 and SS264 housings. You can use wrench 164WR-4 to brace the housing when using this wrench. For use with: B164, SS164, SS264
$66.41
Airmar 164WR-3 Double Handle Transducer Wrench SKU# 57152 Airmar 164WR-3 Double Handle Transducer Wrench SKU# 57152
Transducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut. Wrenches are constructed of 3/16” thick mild steel. They can easily be bent or modified to accommodate challenging installation locations. For use with: B164, SS164, B175C, SS264
$82.03
Airmar 175WR-4 Transducer Housing Wrench SKU# 57087 Airmar 175WR-4 Transducer Housing Wrench SKU# 57087
A single-handed wrench that holds the main thru-hull housing via the 'wrench flats' on the top of the housing to facilitate tightening of the hull nut. Use wrench 164WR-2 or 164WR-3 for the hull nut. For use with: B164, B175, SS164, SS264. NOTE: the design of the housing for these transducers changed in June 2012. This wrench is for the newer design and has an internal width of 2-3/4”. If you need a wrench for the older designs then use the 164WR-4 instead, with an internal width of 2 7/16”
$44.92
Airmar 60WR-1 Crows Foot Transducer Wrench SKU# 57146 Airmar 60WR-1 Crows Foot Transducer Wrench SKU# 57146
Transducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut. Wrenches are constructed of 3/16” thick mild steel. They can easily be bent or modified to accommodate challenging installation locations. For use with: SS60, B60
$40.63
Airmar 60WR-2 Transducer Hull Nut Wrench SKU# 57081 Airmar 60WR-2 Transducer Hull Nut Wrench SKU# 57081
A single-handed wrench to tighten the hull nut on 2” bronze and stainless steel housings. You can use wrench 60WR-4 to brace the housing when using this wrench. For use with: B60, SS60
$52.73
Airmar 60WR-3 Double Handle Transducer Wrench SKU# 57150 Airmar 60WR-3 Double Handle Transducer Wrench SKU# 57150
Transducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut. Wrenches are constructed of 3/16” thick mild steel. They can easily be bent or modified to accommodate challenging installation locations. For use with: B60, SS60
$66.41
Airmar 60WR-4 Transducer Houing Wrench SKU# 57085 Airmar 60WR-4 Transducer Houing Wrench SKU# 57085
A single-handed wrench that holds the main thru-hull housing via the 'wrench flats' on the side of the housing to facilitate tightening of the hull nut. Use wrench 60WR-2 or 60WR-3 for the hull nut. For use with: B60, SS60
$42.97
Airmar 75WR-1 Crows Foot Transducer Wrench SKU# 57147 Airmar 75WR-1 Crows Foot Transducer Wrench SKU# 57147
Transducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut. Wrenches are constructed of 3/16” thick mild steel. They can easily be bent or modified to accommodate challenging installation locations. For use with: B75, SS75
$42.58
Airmar 75WR-2 Transducer Hull Nut Wrench SKU# 57082 Airmar 75WR-2 Transducer Hull Nut Wrench SKU# 57082
A single-handed wrench to tighten the hull nut on bronze and stainless steel housings. You can use wrench 75WR-4 to brace the housing when using this wrench. For use with: B75, SS75
$51.10
Airmar 75WR-3 Double Handle Transducer Wrench SKU# 57151 Airmar 75WR-3 Double Handle Transducer Wrench SKU# 57151
Transducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut. Wrenches are constructed of 3/16” thick mild steel. They can easily be bent or modified to accommodate challenging installation locations. For use with: B75, SS75
$67.89
Airmar 75WR-4 Transducer Housing Wrench SKU# 57086 Airmar 75WR-4 Transducer Housing Wrench SKU# 57086
A single-handed wrench that holds the main thru-hull housing via the 'wrench flats' on the side of the housing to facilitate tightening of the hull nut. Use wrench 75WR-2 or 75WR-3 for the hull nut. For use with: B75, SS75
$46.88
Airmar B164 1kW 0° Thru-Hull Transducer for Simrad w/Blue Connector SKU# 59852 Airmar B164 1kW 0° Thru-Hull Transducer for Simrad w/Blue Connector SKU# 59852
The B164 is a 1kW bronze low-profile transducer with a fast-response temperature sensor. The transducer is ideal for fast, trailered, tournament, sport-fishing boats that cannot install an external fairing. This version has a zero degree tilt for hull deadrise angles of 0-7 degrees. The BL (Blue Connector) version of the B164 transducer is for Lowrance fishfinders and sounders that use the standard Lowrance 7-pin blue connector.
$845.59
Airmar B164 1kW 20° Thru-Hull Transducer w/Blue Connector *No-Stock Item* SKU# 61942 Airmar B164 1kW 20° Thru-Hull Transducer w/Blue Connector *No-Stock Item* SKU# 61942
Step up to a 1kW - Without a Fairing!Airmar has taken our innovative Tilted Element™ technology to a higher power. The 1kW, flush-mount, Tilted Element transducer is perfect for fast, trailered, tournament sportfishing vessels that cannot have a High-Performance Fairing. The flush-mounted, bronze housing protrudes less than 6.35mm (0.25”) outside your hull and can sit on trailer rollers and bunks with no damage at all.
Non-Stock Item
$1,006.26
Airmar B175H Bronze Thru-Hull 0° Tilted Element w/Bare Wires SKU# 59851 Airmar B175H Bronze Thru-Hull 0° Tilted Element w/Bare Wires SKU# 59851
High-Frequency bronze thru-hull covers popular fishing frequency of 200 kHz plus everything else in the bandwidth. Features: High - CHIRPS from 130 kHz to 210 kHz, 15° to 9° beamwidth; 0° tilted element; 80 kHz of total bandwidth from one transducer; Depth and fast response water-temperature sensor; Bronze transducer housing; Boat Size: Up to 11m (36'); Hull Type: Fiberglass or wood
$1,076.47
Airmar B258 / SS258 High Speed Fairing Block SKU# 51229 Airmar B258 / SS258 High Speed Fairing Block SKU# 51229
B258, SS258 High Speed Fairing Block. Airmar High Speed Fairing block for B258, SS258 Style Transducer
$128.05
Airmar B275LH-W Bronze Thru-Hull - Low & High Wide Frequency w/Bare Wires SKU# 60562 Airmar B275LH-W Bronze Thru-Hull - Low & High Wide Frequency w/Bare Wires SKU# 60562
Get more coverage under the boat with Airmar's new wide beam CHIRP product line. Offering a high frequency range of 150-250 kHz and a constant 25° beam width, these transducers are truly broadband at its best. In addition to improving the performance of CHIRP-ready echosounders, anglers using the new wide beam transducers will achieve twice the coverage under the boat compared to our current high frequency CHIRP transducers.
$1,970.59
Airmar Deadrise Angle Finder - Accuracy of ± 1/2° SKU# 59882 Airmar Deadrise Angle Finder - Accuracy of ± 1/2° SKU# 59882
Accurate to 1/2 of 1°, this precision instrument, with strong ceramic magnet is designed for attachment to a carpenter's square or straight edge to overcome time consuming computation of angles. Features: Quickly measures boat hull deadrise angle. Ball Bearing construction for accuracy. Attach to straight edge or framing square. Handy angle and grade chart on back of unit.
$29.99
Airmar DST800 Bronze Transducer - Depth, Speed, Temp - NMEA 2000 Interface SKU# 61669 Airmar DST800 Bronze Transducer - Depth, Speed, Temp - NMEA 2000 Interface SKU# 61669
Airmar 'Smart' transducers contain active circuitry that converts the sensor data into a standard NMEA format. NMEA 2000 versions output standard NMEA 2000 data formats and have an NMEA 2000 drop cable attached, ready to plug into a T-connector on a network backbone. These transducers are powered by the network. Smart depth transducers use the 235kHz frequency so as not to interfere with fishfinder transducers.
$415.00
Airmar DT812BV-235-N2 235 kHz Tilted Element™ Smart™ Sensor 12° Tilt Bronze NMEA 2000 SKU# 59744 Airmar DT812BV-235-N2 235 kHz Tilted Element™ Smart™ Sensor 12° Tilt Bronze NMEA 2000 SKU# 59744
Airmar has taken its proven Tilted Element™ and broadband technologies and applied them to its leading line of Smart™ Sensors. The DT800 is a low-profile, retractable, thru-hull sensor that computes accurate depth and temperature data and sends it to any NMEA 0183 or NMEA 2000® display. The DT800 operates at a frequency of 235 kHz and can run simultaneously with other Airmar 50/200 kHz transducers on-board with no interference.
$447.51
Airmar DT820BV-235-N2 235 kHz LP Tilted ™ Smart™ Sensor 20° Tilt Bronze NMEA 2000  SKU# 59743 Airmar DT820BV-235-N2 235 kHz LP Tilted ™ Smart™ Sensor 20° Tilt Bronze NMEA 2000 SKU# 59743
Airmar has taken its proven Tilted Element™ and broadband technologies and applied them to its leading line of Smart™ Sensors. The DT800 is a low-profile, retractable, thru-hull sensor that computes accurate depth and temperature data and sends it to any NMEA 0183 or NMEA 2000® display. The DT800 operates at a frequency of 235 kHz and can run simultaneously with other Airmar 50/200 kHz transducers on-board with no interference.
$447.51
Airmar M265C-LH Low/High CHIRP In-Hull Transducer SKU# 61925 Airmar M265C-LH Low/High CHIRP In-Hull Transducer SKU# 61925
The Airmar M265C-LH is a 1,000W transducer designed to work with chirp sonar systems and utilizes the Low and High Frequency ranges (Frequency Range Below). The M265C has 8 highly sensitive internal broadband ceramic assemblies to accurately mark depth, bait and fish, making it the perfect choice for commercial and recreational fisherman. You will also be able to see increased target detection whether you are fishing inshore or in deep offshore canyons.
$1,357.53
Airmar P66 Transom Mounting Bracket - 2004 & Up SKU# 48017 Airmar P66 Transom Mounting Bracket - 2004 & Up SKU# 48017
Transom Mounting Bracket for P66 Transducer - 2004 & up
$34.95
Airmar R109C-LH 2kW Thru-Hull Transducer *Non-Stock Item* SKU# 61472 Airmar R109C-LH 2kW Thru-Hull Transducer *Non-Stock Item* SKU# 61472
CHIRP transducers enable bottom detection down to 3,000M (10,000') with 5 to 10 times greater detail and resolution so precise it's possible to distinguish between individual baitfish, game fish, and underwater structures. One transducer delivers up to 117 kHz of total bandwidth in just one installation, saving customers time and money.
Non-Stock Item
$2,687.50
CANN-1491072 Digi-Troll IV Transducer CANN-1491072 Digi-Troll IV Transducer
Cannon 1491072 Digi-Troll IV Transducer, Provides bottom tracking ability to Digi-Troll IV downriggers. Network up to six downriggers to troll at set distances from the bottom through this single transducer. Transom mount.
$89.03
Furuno 525-5PWD Plastic TM Transducer, 600W (10-Pin) SKU# 13827 Furuno 525-5PWD Plastic TM Transducer, 600W (10-Pin) SKU# 13827
Plastic Transom Mount Transducer, 600w (10-Pin). 600 Watts. 50/200 kHz. 46/10 degree Beam Angles. Plastic Transom Mount w/bracket. 8-Meter Cable with 10-Pin Connector. MFG #: 525-5PWD
$108.11
Furuno 526T-HDN Bronze Broadband Thru-Hull Transducer SKU# 25489 Furuno 526T-HDN Bronze Broadband Thru-Hull Transducer SKU# 25489
Bronze Broadband Thru-Hull with Temp and Hi-Speed Fairing Block, 1kW (No Plug). 526TID-HDN Thru-Hull Transducer with Broadband Technology. 1 kW. 50/200 kHz, no Diplexer. 20/6 degree Beam Angles. Bronze Thru-Hull with Temperature MFG #: 526TID-HDN 10 Meter Cable No connector provided Ships with High-Speed Fairing Block, # AIR-033-391 MB1100 required for some applications - contact Furuno for more information
$1,157.90
Page 1 of 8
Page: 1  [2]  [3]  [4]  [5]  [6]  [7]  [8
  Log In or Register to Post, Sell, Purchase, Contact, Inquire and Select Items.
YOS Shop YOS Shop items are brand new, unless otherwise indicated.
 Post an Item You Are Looking For, "Needed", Free.
 Post an Item You Want to Sell, "For Sale".  Purchase "For Sale" posting credits.
 Posting Help.
 Contact and Sell to a "Needed" poster using a "For Sale" posting credit.
 Purchase "For Sale" Posting credits.
 Not sure if you have what the poster wants? Contact Us to relay your questions to a Poster before using a posting credit. Please include "Posted By" Name and "Post Name".
 
Home  |  Browse  |  Search  |  Help  |  Advertise  |  Contact Us YachtsOfStuff.com Boating Supply
Terms & Conditions
Legal Notices
Privacy Policy
Report Problems
© 2002-2017; S2ware, LLC; All rights reserved.